ENGLISH 17
Reset function
This function allows you to reset the parent unit and the baby unit to the default settings.You can use this function if problems occur that you cannot solve by following the suggestions in chapter ‘Frequently asked questions’.You have to reset each unit separately.
1Press the on/off button to switch off the parent unit. Remove the small plug from the parent unit and the adapter from the wall socket.
2Press and hold the volume down
3Wait for the parent unit to complete its automatic restart at its default settings before you release the volume down
4Proceed in the same way to reset the baby unit.
Default settings
Parent unit
-Loudspeaker volume: 1
-Microphone sensitivity: 3 Baby unit
-Loudspeaker volume: medium
-Nightlight: off
Accessories
Belt clip
If the battery pack of the parent unit is sufficiently charged, you can take the unit with you inside and outside the house if you attach the unit to your belt with the belt clip.This allows you to monitor your baby while you are moving around.
Connecting the belt clip
1Snap the belt clip onto the parent unit.
Disconnecting the belt clip
1Pull the belt clip off the parent unit.
Cleaning and maintenance
Do not immerse the parent unit or the baby unit in water and do not clean them under the tap.
Do not use cleaning spray or liquid cleaners.
1Unplug the baby unit or the parent unit if they are connected to an electrical outlet.
2Clean the parent unit and the baby unit with a damp cloth.
Make sure the units are dry before you connect them to an electrical outlet.