Bosch Appliances VG5 600 user manual Communication Setup Menu

Page 17

AutoDome 600 Series Analog PTZ CameraOn-Screen Display Menu Navigation en 17

2.6	Communication Setup Menu

The Communication Setup Menu provides access to baud rate and Bilinx control settings. Menu items marked with an asterisk (*) are the default settings.

Communication Setup

Exit...
* AutoBaud:	ON
* Baud Rate	9600
* Bilinx:	ON
Restore Defaults...

* = Factory Setting

Focus / Iris: Select

Communication Setup Menu Choices:

Menu	Description	Sub-menu / Description	Default
			Setting

Exit	Saves and exits the menu.

AutoBaud	Turns AutoBaud detection on.	Toggles ON or OFF.	ON
		ON automatically accepts baud rates from 2400 to
		57600.
		(Note: If stepping from 2400 to 57600 baud, you
		must first set the controller to 19200 for AutoBaud
		to detect the higher baud rate.)

Baud Rate	Manually sets the baud rate when	Choices are 2400, 4800, 9600, 19200, 38400, and	9600
	AutoBaud is set to OFF.	57600. Then follow the OSD to confirm the
		selection.

Bilinx	Turns on Bilinx control communication.	Toggles ON or OFF.	ON
	(Only available when not connected to
	a Bilinx data interface unit.)

Bosch Security Systems, Inc.

User Manual

F.01U.270.005 2.0 2012.06

Image 17

Contents AutoDome 600 Series Analog PTZ Cam- era Page Table of Contents Keyboard Commands by Number Advanced Features Bosch Menu locked PTZ Setup unlocked Other MenusTroubleshooting Guide User Command Table Appendix FastAddress Conversions IndexGetting Started Powering OnEstablishing AutoDome Control For each of the system componentsLCD Keyboard CommandsBasic Keyboard Operation FastAddress Setting the Camera AddressTo set an address for a camera without an address To change or clear an address for a camera with an addressSpecial Passwords Setting PasswordsPassword Security Level To set or change a password locked commandTo open the main Setup Menu locked command Setup MenuSetup Menu On-Screen Display Menu NavigationCamera Setup Menu Auto ATWInternal OFFPAL Lens SetupExit Auto Focus Auto IrisSpot PTZ Setup MenuConstant FastNormal Momentary Display Setup MenuSector 1-16 Press Focus/Iris to blank or Edit Scene Title to accessPrivacy Masking Edit Sector TitleCommunication Setup Menu Alarm I/O Setup Inputs Setup Alarm I/O SetupInputs NoneOutputs Setup Outputs Setup MenuAlarm Relay OutputsRule Rule Setup MenuRule Setup None Language Menu Advanced Feature Setup MenuAdvanced Feature Setup Diagnostics Menu Bist 11.1 Alarm Status Submenu 2Setting Preset Shots Common AutoDome User Commands unlockedSetting AutoPan Mode Specifying a Shot or a Sector Title 4Configuring Preposition ToursTo start Preposition Tour To stop a Preposition Tour6Recording Tours 5Programming the Inactivity OperationAlternative Control Protocols Setting FastAddress with Alternative ProtocolsUsing an American Dynamics Controller Enter FastAddress Exit Command LockFastAddress Setting FastAddress with a Pelco Keyboard 2Using a Pelco ControllerNew Fast Address Saved Setup Menu Hardware Configuration Pelco Protocol ModeKeyboard Command User Action Description Pattern Pelco Keyboard CommandsAux On / Aux Off Aux OnPreset Command Description Special Preset CommandsPreset Initiates Preset TourPelco On-Screen Menus Bosch Menu locked Command Lock lockedPelco menu Bosch menu Setup Menu Camera Setup unlocked PTZ Setup unlockedPelco Camera Setup Menu provides access to camera settings OutdoorOther Menus Keyboard Commands by Number Zone Title Menu Enters Zone Title menu. Refer to Refer to .8 Azimuth, Elevation, Compass Directions, Locked Function Comm Command Description Key Alarm Rules Advanced FeaturesControlling Alarm Rules Alarm Rule ExamplesExample 2 Advanced Alarm Rule Click the Online Config button and then expand Alarm Example 3 Advanced Alarm Rule using AutoTrackClick Output Option Select Shot from the Type drop-down listOutput Option 6 Configuration AutoTrack Operation AutoTrack Settings and RecommendationsMount/Mounting Surface Stability AutoTrack OptimizationField of View Unwanted MotionVirtual Masking Setting AutoTrack Optimization ParametersPrivacy Masking Consistent Light ConditionsMotion Detection with Region of Interest Preset positions 90 throughImage Stabilization 7Pre-position TourAzimuth Range Compass Direction Setting the Azimuth Zero Point8Azimuth, Elevation, and Compass Directions Function Command Description Key Number AutoHome Recalibration Commands and SettingsDisplaying Azimuth, Elevation, and Compass Headings Readings and the compass heading in the following wayPreset or Recorded Tour Using the AutoHome RecalibrationSetting Values AutoHome Recalibration OperationIf O.K., then If using a non-Bosch power supply Troubleshooting GuideIf O.K., then If there is power to the AutoDome, then VG5 AutoDome Operation and ControlCannot access user If amber LED does not light when given PTZ commands, thenSettings No camera controlDoes not switch If O.K., then Automatically when Setting FastAddressWith an American Dynamics KeyboardOn monitor display Inside of OutdoorLow Voltage flashing Audio Connections with an VG5 600 Series AutoDome 2VG5 Series AutoDome AudioProblem Solution No Audio Poor Audio Problem Solution If O.K., thenUser Command Table AutoDome 600 Series Analog PTZ Camera User Command Table en Group Appendix FastAddress ConversionsBlock Numerics IndexCommand lock 36 Command Lock menu 37 commands Setup Custom tour PTZ En Index AutoDome 600 Series Analog PTZ Camera Page Page Page Bosch Security Systems, Inc