Bosch Appliances VG5 600 user manual Setting the Camera Address, FastAddress

AutoDome 600 Series Analog PTZ CameraGetting Started en 7

1.3	Setting the Camera Address
	Once the AutoDome power is turned on and homing is complete, you must set the camera
	address. You may also want to assign a password and customize some of the AutoDome
	default settings.
	NOTICE! You do not need to set a camera address if using Bilinx or Ethernet communication.
	See the VG5 AutoDome Installation Manual to configure an AutoDome for Bilinx or Ethernet
	operation.
1.3.1	FastAddress
	FastAddress is an AutoDome feature that allows you to set or change a camera address using
	the keyboard and on-screen menus.

There are three (3) FastAddress commands:

– ON-999-ENTER: Displays and programs all cameras without an address in the system.

NOTICE! If a keyboard is set to a camera number that already has an address, that camera also responds to this command.

–ON-998-ENTER: Displays and programs all cameras with or without an address in the system.

–ON-997-ENTER: Displays the current address status of all cameras in the system simultaneously.

To set an address for a camera without an address:

1.Select the camera number you want to FastAddress. The system displays the camera number on the keyboard and the image on the corresponding monitor.

2.Press #-ENTER(where # is the camera number without an address).

3.Press ON-999-ENTERto invoke an on-screen display of cameras on the system without an address.

4.Follow the on-screen instructions. You receive an on-screen confirmation when the FastAddress is complete.

To change or clear an address for a camera with an address:

1.Select the camera number you want to FastAddress. The system displays the camera number on the keyboard and the image on the corresponding monitor.

2.Press #-ENTER(where # is the camera number with an address).

3.Press ON-998-ENTERto invoke an on-screen display of all cameras on the system, with or without an address.

4.Follow the on screen instructions. You receive an on-screen confirmation when the FastAddress is complete.

NOTICE!

FastAddress is stored in nonvolatile memory and does not change if the power is turned off or if the default settings are restored.

Bosch Security Systems, Inc. User Manual F.01U.270.005 2.0 2012.06