Bosch Appliances VG5 600 user manual Special Preset Commands, Preset Command Description

Page 35

AutoDome 600 Series Analog PTZ CameraAlternative Control Protocols en 35

4.2.4	Special Preset Commands
		Some Pelco mode preset commands have a special meaning and override the normal Pelco
		preset function as follows:

		Preset Command	Description

		33-PRESET	Pans the AutoDome 180° (Flip).

		34-PRESET	Goes to Zero Pan (original home position).

		80-PRESET	Toggles the Synchronization Mode between Line Lock and Internal
			(Pelco Frame Scan). This command is available if commands are
			unlocked using the Main menu.

		81-PRESET	Initiates Preset Tour 1.

		82-PRESET	Initiates Preset Tour 2.

		92-PRESET	Sets the Left pan limit for an AutoScan with Limit Stops enabled.

		93-PRESET	Sets the Right pan limit for an AutoScan with Limit Stops enabled.

		94-PRESET	Initiates a Preset Tour.

		95-PRESET	Enables or disables Limit Stops in the Setup Menu for AutoScan.
			Invokes the Pelco main Setup Menu when pressed for 2 seconds.

		96-PRESET	Stops a scan.

		97-PRESET	Initiates FastAddress (Pelco Random Scan).

		98-PRESET	Toggles the Synch. Mode between Line Lock and Internal (Pelco Frame
			Scan). This command is available only for two (2) minutes after the
			power is applied and then reverts to normal preset functionality.

		99-PRESET	Starts an AutoScan

NOTICE!

Some Pelco controllers do not support all the preset command numbers. Consult the specific Pelco controller's documentation for supported preset commands.

Bosch Security Systems, Inc.

User Manual

F.01U.270.005 2.0 2012.06

Image 35

Contents AutoDome 600 Series Analog PTZ Cam- era Page Table of Contents User Command Table Appendix FastAddress Conversions Index Bosch Menu locked PTZ Setup unlocked Other MenusKeyboard Commands by Number Advanced Features Troubleshooting GuideFor each of the system components Powering OnGetting Started Establishing AutoDome ControlLCD Keyboard CommandsBasic Keyboard Operation To change or clear an address for a camera with an address Setting the Camera AddressFastAddress To set an address for a camera without an addressTo set or change a password locked command Setting PasswordsSpecial Passwords Password Security LevelOn-Screen Display Menu Navigation Setup MenuTo open the main Setup Menu locked command Setup MenuCamera Setup Menu OFF ATWAuto InternalAuto Iris Lens SetupPAL Exit Auto FocusFast PTZ Setup MenuSpot ConstantNormal Momentary Display Setup MenuEdit Sector Title Edit Scene Title to accessSector 1-16 Press Focus/Iris to blank or Privacy MaskingCommunication Setup Menu None Alarm I/O SetupAlarm I/O Setup Inputs Setup InputsOutputs Outputs Setup MenuOutputs Setup Alarm RelayRule Rule Setup MenuRule Setup None Language Menu Advanced Feature Setup MenuAdvanced Feature Setup Diagnostics Menu Bist 11.1 Alarm Status Submenu 2Setting Preset Shots Common AutoDome User Commands unlockedSetting AutoPan Mode To stop a Preposition Tour 4Configuring Preposition ToursSpecifying a Shot or a Sector Title To start Preposition Tour6Recording Tours 5Programming the Inactivity OperationAlternative Control Protocols Setting FastAddress with Alternative ProtocolsUsing an American Dynamics Controller Enter FastAddress Exit Command LockFastAddress Setting FastAddress with a Pelco Keyboard 2Using a Pelco ControllerNew Fast Address Saved Setup Menu Hardware Configuration Pelco Protocol ModeAux On Pelco Keyboard CommandsKeyboard Command User Action Description Pattern Aux On / Aux OffInitiates Preset Tour Special Preset CommandsPreset Command Description PresetPelco On-Screen Menus Bosch Menu locked Command Lock lockedPelco menu Bosch menu Setup Menu Outdoor PTZ Setup unlockedCamera Setup unlocked Pelco Camera Setup Menu provides access to camera settingsOther Menus Keyboard Commands by Number Zone Title Menu Enters Zone Title menu. Refer to Refer to .8 Azimuth, Elevation, Compass Directions, Locked Function Comm Command Description Key Alarm Rule Examples Advanced FeaturesAlarm Rules Controlling Alarm RulesExample 2 Advanced Alarm Rule Select Shot from the Type drop-down list Example 3 Advanced Alarm Rule using AutoTrackClick the Online Config button and then expand Alarm Click Output OptionOutput Option 6 Configuration AutoTrack Operation AutoTrack Settings and RecommendationsUnwanted Motion AutoTrack OptimizationMount/Mounting Surface Stability Field of ViewConsistent Light Conditions Setting AutoTrack Optimization ParametersVirtual Masking Privacy Masking7Pre-position Tour Preset positions 90 throughMotion Detection with Region of Interest Image StabilizationAzimuth Range Compass Direction Setting the Azimuth Zero Point8Azimuth, Elevation, and Compass Directions Readings and the compass heading in the following way AutoHome Recalibration Commands and SettingsFunction Command Description Key Number Displaying Azimuth, Elevation, and Compass HeadingsAutoHome Recalibration Operation Using the AutoHome RecalibrationPreset or Recorded Tour Setting ValuesVG5 AutoDome Operation and Control Troubleshooting GuideIf O.K., then If using a non-Bosch power supply If O.K., then If there is power to the AutoDome, thenNo camera control If amber LED does not light when given PTZ commands, thenCannot access user SettingsDynamics Keyboard Setting FastAddressDoes not switch If O.K., then Automatically when With an AmericanOn monitor display Inside of OutdoorLow Voltage flashing Audio Connections with an VG5 600 Series AutoDome 2VG5 Series AutoDome AudioProblem Solution No Audio Poor Audio Problem Solution If O.K., thenUser Command Table AutoDome 600 Series Analog PTZ Camera User Command Table en Group Appendix FastAddress ConversionsBlock Numerics IndexCommand lock 36 Command Lock menu 37 commands Setup Custom tour PTZ En Index AutoDome 600 Series Analog PTZ Camera Page Page Page Bosch Security Systems, Inc