Bosch Appliances VG5 600 user manual Common AutoDome User Commands unlocked, Setting AutoPan Mode

Page 26

26 en Common AutoDome User Commands (unlocked)AutoDome 600 Series Analog PTZ Camera

3

Common AutoDome User Commands (unlocked)

 

This chapter details the commonly used Bosch keyboard setup commands. See

 

Section 6 Keyboard Commands by Number, Page 41, for a complete list of commands.

3.1

Setting AutoPan Mode

 

AutoPan mode pans the AutoDome camera 360º or pans between user defined limits (when

 

programmed). The AutoDome camera continues to pan until stopped by moving the joystick.

To pan 360º:

1.Press ON-1-ENTER.

2.Move the joystick to stop the pan.

To set left and right pan limits:

1.Move the camera to the starting position and press SET-101-ENTERto set the left limit.

2.Move the camera to the end position and press SET-102-ENTERto set the right limit.

To start AutoPan between limits: 1. Press ON-2-ENTER.

2. Move the joystick to stop the pan.

3.2Setting Preset Shots

Preset shots are saved camera positions. Shots are saved as scenes, therefore, the terms SHOT and SCENE are used interchangeably.

To set a Shot:

1.Move the camera to the position you want to save.

2.Press SET-#-ENTERwhere # can be a number from 1 to 99 that identifies the camera position of the scene.

3.To specify a title for the shot, see the procedure below.

To view a Shot:

Press SHOT-#-ENTERwhere # is the number of the scene position you want to view.

To store or clear a Shot:

1.Press SET-100-ENTER to access the Store/Clear Scene Menu.

2.Follow the on-screen instructions.

To disable overwrite confirmations:

If you overwrite a preset shot the AutoDome issues a confirmation message prompting you approve the overwrite. To disable this confirmation message issue the OFF-89-ENTERcommand.

F.01U.270.005 2.0 2012.06

User Manual

Bosch Security Systems, Inc.

Image 26
Contents AutoDome 600 Series Analog PTZ Cam- era Page Table of Contents Troubleshooting Guide Bosch Menu locked PTZ Setup unlocked Other MenusKeyboard Commands by Number Advanced Features User Command Table Appendix FastAddress Conversions IndexEstablishing AutoDome Control Powering OnGetting Started For each of the system componentsLCD Keyboard CommandsBasic Keyboard Operation To set an address for a camera without an address Setting the Camera AddressFastAddress To change or clear an address for a camera with an addressPassword Security Level Setting PasswordsSpecial Passwords To set or change a password locked commandSetup Menu Setup MenuTo open the main Setup Menu locked command On-Screen Display Menu NavigationCamera Setup Menu Internal ATWAuto OFFExit Auto Focus Lens SetupPAL Auto IrisConstant PTZ Setup MenuSpot FastNormal Display Setup Menu MomentaryPrivacy Masking Edit Scene Title to accessSector 1-16 Press Focus/Iris to blank or Edit Sector TitleCommunication Setup Menu Inputs Alarm I/O SetupAlarm I/O Setup Inputs Setup NoneAlarm Relay Outputs Setup MenuOutputs Setup OutputsRule Rule Setup MenuRule Setup None Language Menu Advanced Feature Setup MenuAdvanced Feature Setup Diagnostics Menu Bist 11.1 Alarm Status Submenu 2Setting Preset Shots Common AutoDome User Commands unlockedSetting AutoPan Mode To start Preposition Tour 4Configuring Preposition ToursSpecifying a Shot or a Sector Title To stop a Preposition Tour5Programming the Inactivity Operation 6Recording ToursAlternative Control Protocols Setting FastAddress with Alternative ProtocolsUsing an American Dynamics Controller Exit Command Lock Enter FastAddressFastAddress Setting FastAddress with a Pelco Keyboard 2Using a Pelco ControllerNew Fast Address Saved Setup Menu Pelco Protocol Mode Hardware ConfigurationAux On / Aux Off Pelco Keyboard CommandsKeyboard Command User Action Description Pattern Aux OnPreset Special Preset CommandsPreset Command Description Initiates Preset TourPelco On-Screen Menus Bosch Menu locked Command Lock lockedPelco menu Bosch menu Setup Menu Pelco Camera Setup Menu provides access to camera settings PTZ Setup unlockedCamera Setup unlocked OutdoorOther Menus Keyboard Commands by Number Zone Title Menu Enters Zone Title menu. Refer to Refer to .8 Azimuth, Elevation, Compass Directions, Locked Function Comm Command Description Key Controlling Alarm Rules Advanced FeaturesAlarm Rules Alarm Rule ExamplesExample 2 Advanced Alarm Rule Click Output Option Example 3 Advanced Alarm Rule using AutoTrackClick the Online Config button and then expand Alarm Select Shot from the Type drop-down listOutput Option 6 Configuration AutoTrack Settings and Recommendations AutoTrack OperationField of View AutoTrack OptimizationMount/Mounting Surface Stability Unwanted MotionPrivacy Masking Setting AutoTrack Optimization ParametersVirtual Masking Consistent Light ConditionsImage Stabilization Preset positions 90 throughMotion Detection with Region of Interest 7Pre-position TourAzimuth Range Compass Direction Setting the Azimuth Zero Point8Azimuth, Elevation, and Compass Directions Displaying Azimuth, Elevation, and Compass Headings AutoHome Recalibration Commands and SettingsFunction Command Description Key Number Readings and the compass heading in the following waySetting Values Using the AutoHome RecalibrationPreset or Recorded Tour AutoHome Recalibration OperationIf O.K., then If there is power to the AutoDome, then Troubleshooting GuideIf O.K., then If using a non-Bosch power supply VG5 AutoDome Operation and ControlSettings If amber LED does not light when given PTZ commands, thenCannot access user No camera controlWith an American Setting FastAddressDoes not switch If O.K., then Automatically when Dynamics KeyboardOn monitor display Inside of OutdoorLow Voltage flashing 2VG5 Series AutoDome Audio Audio Connections with an VG5 600 Series AutoDomeProblem Solution No Audio Problem Solution If O.K., then Poor AudioUser Command Table AutoDome 600 Series Analog PTZ Camera User Command Table en Group Appendix FastAddress ConversionsBlock Index NumericsCommand lock 36 Command Lock menu 37 commands Setup Custom tour PTZ En Index AutoDome 600 Series Analog PTZ Camera Page Page Page Bosch Security Systems, Inc