Bosch Appliances VG5 600 user manual Rule Setup Menu

20 en On-Screen Display Menu NavigationAutoDome 600 Series Analog PTZ Camera

2.8	Rule Setup Menu
		The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an
		existing rule. The default setting is Empty.
	NOTICE!
	You can program a total of twelve rules. You must define the inputs and outputs before you
	program a rule. See Section 2.7 Alarm I/O Setup, page 18, to configure alarm inputs and
	outputs.
		Rule Setup...			Rule 1
		Exit...			Exit...
		1. Rule 1	Enabled		Enabled	YES
		2. Rule 2	Disabled		Input:
		3. Rule 3	Invalid		NONE
		4. Rule 4	Empty		NONE
		5. Rule 5	Empty		NONE
		6. Rule 6	Empty
		7. Rule 7	Empty		Output:
		8. Rule 8	Empty		OSD
		9. Rule 9	Empty		Shot 2
		10. Rule 10	Empty		Alarm Relay	2 sec
		11. Rule 11	Empty		NONE
		12. Rule 12	Empty
		4. Rule 4	Empty
					Right / Left: Select Period Time
		Focus / Iris: Select			Focus / Iris: Select Type
		Rule Setup Menu Choices
Menu	Description			Sub-menu / Description			Default
							Setting
Exit	Saves and exits the menu.
Rule 1-12	Displays the status of a rule			Enabled: The rule inputs and outputs are properly			Empty
	on the right side of the			defined and the rule is turned on.
	menu. There are four (4)			Disabled: The rule inputs and outputs are defined but the
	possible rule statuses.			rule is turned off.
				Invalid: The rule has a missing or invalid input or output.
				Empty: The rule has no inputs or outputs defined.
		Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows
		you to configure a rule from previously defined alarm inputs and outputs. Once an alarm is
		configured with valid inputs and outputs, it can be turned on or off (enabled or disabled)
		through its configuration menu.

F.01U.270.005 2.0 2012.06 User Manual Bosch Security Systems, Inc.