Bosch Appliances VG5 600 user manual Other Menus

AutoDome 600 Series Analog PTZ CameraPelco On-Screen Menus en 39

PTZ Setup Menu Choices:
Menu	Description	Sub-menu / Description	Default
			Setting
Exit	Exits the menu.?
Edit Tour 1	Accesses the Add /	Exit: Exits the menu.
	Remove Scenes On	Scene (1 - 5): Adds or removes
	Standard Tour 1 Menu.	scenes from the Standard Tour.
Edit Tour 2	Accesses the Edit Custom	Exit: Exits the menu.
	Tour Menu.	Scene (1 - 5): Adds or removes
		scenes from the Custom Tour.
Tour 1 Period	Changes the length of	Sliding scale: – (3 sec. to 10 min.) +	5 sec.
	waiting time between
	presets.
Tour 2 Period	Changes the length of	Sliding scale: – (3 sec. to 10 min.) +	5 sec.
	waiting time between
	presets.
Scan Speed	Changes the Autopan and	Sliding scale: – (1°/sec to 60°/sec)	30°/
	AutoScan speeds.	+	sec.
Edit Presets	Modifies preset scenes.	1-99 scenes
Limit Stops	Toggles the Limit Stops for	ON or OFF	OFF
	AutoScan.
Recordings	Selects record Pattern 1 or	“A” or “B”	“A”
	2, if normal pattern
	command does not
	respond.
AutoPivot	Follows a subject while	ON or OFF	ON
	beneath the camera,
	without inverting the
	picture.

5.1.4	Other Menus
		Menu	Description	Default
				Setting
		Edit Password	Sets or displays the password. See Section 1.4 Setting
			Passwords, page 8.
		FastAddress (locked)	Sets or changes the AutoDome address.	Not Set
		Software Version	Displays the camera software version.
		(unlocked)
		Ack and Reset Alarms	Acknowledges and resets alarms. If there is no active
			alarm input, the OSD displays the following message:
			“No Active Alarms.”
		Restore All Settings	Restores all settings to their original factory default
		(locked)	settings.
		Reset All Memory	Restores all settings to their original factory default
		(locked)	settings and clears all user programmed settings such
			as preset scenes and recordings.

Bosch Security Systems, Inc. User Manual F.01U.270.005 2.0 2012.06