Bosch Appliances VG5 600 user manual Basic Keyboard Operation, Keyboard Commands, Lcd

Page 6

6 en Getting StartedAutoDome 600 Series Analog PTZ Camera

1.2.1	Basic Keyboard Operation
		The following tables summarize the basic operations for a standard keyboard and the
		functions available to control an AutoDome camera.

		Typical Keyboard	Usage
		Features

		Function Keys	Selects a specific control setting.

		Number Keys	Inputs a number from 0 to 9.

		Camera Key	Selects a camera number.

		Enter Key	Inputs a selection.

		Focus Key	Sets the lens focus or makes a menu selection in OSD mode.

		Iris Key	Sets the lens iris setting or makes a menu selection in OSD mode.

		Key LEDs	Indicates an active key.

		LCD	Displays the current status.

		Joystick	Controls a pan/tilt/zoom (PTZ) AutoDome camera.

		Table 1.1 Typical Keyboard Functions

		Dome Operation	How to control

		To Pan Side to Side	Move the joystick left or right.

		To Tilt Up and Down	Move the joystick forward and back.

		To Zoom In	Twist the joystick clockwise.

		To Zoom Out	Twist the joystick counterclockwise.

		Table 1.2 Typical Keyboard Controls for an AutoDome Camera
1.2.2	Keyboard Commands
		Keyboard control commands are composed of a sequence of three (3) inputs with the
		following convention: 1) a Function key + 2) a Command number key(s) + 3) the Enter key.
		– Depending on the type of keyboard, the control function keys are labeled:
		ON or AUX ON
		OFF or AUX OFF
		SET or SET SHOT
		SHOT or SHOW SHOT

NOTICE!

The convention used for control key commands in this manual is ON, OFF, SET, and SHOT. Refer to your keyboard manual for the key naming conventions.

–Command numbers range from 1 to 999. See Section 6 Keyboard Commands by Number, page 40 for a complete list of keyboard commands.

–The Enter key can also be labeled with the ∞? symbol.

For example, the keyboard command to make the AutoDome pan 360º continuously is:

ON-1-ENTER(press the ON key, then press the number 1 key, and then press ENTER.)

F.01U.270.005 2.0 2012.06

User Manual

Bosch Security Systems, Inc.

Image 6

Contents AutoDome 600 Series Analog PTZ Cam- era Page Table of Contents Troubleshooting Guide Bosch Menu locked PTZ Setup unlocked Other MenusKeyboard Commands by Number Advanced Features User Command Table Appendix FastAddress Conversions IndexEstablishing AutoDome Control Powering OnGetting Started For each of the system componentsKeyboard Commands Basic Keyboard OperationLCD To set an address for a camera without an address Setting the Camera AddressFastAddress To change or clear an address for a camera with an addressPassword Security Level Setting PasswordsSpecial Passwords To set or change a password locked commandSetup Menu Setup MenuTo open the main Setup Menu locked command On-Screen Display Menu NavigationCamera Setup Menu Internal ATWAuto OFFExit Auto Focus Lens SetupPAL Auto IrisConstant PTZ Setup MenuSpot FastNormal Display Setup Menu MomentaryPrivacy Masking Edit Scene Title to accessSector 1-16 Press Focus/Iris to blank or Edit Sector TitleCommunication Setup Menu Inputs Alarm I/O SetupAlarm I/O Setup Inputs Setup NoneAlarm Relay Outputs Setup MenuOutputs Setup OutputsRule Setup Menu Rule SetupRule None Advanced Feature Setup Menu Advanced Feature SetupLanguage Menu Diagnostics Menu Bist 11.1 Alarm Status Submenu Common AutoDome User Commands unlocked Setting AutoPan Mode2Setting Preset Shots To start Preposition Tour 4Configuring Preposition ToursSpecifying a Shot or a Sector Title To stop a Preposition Tour5Programming the Inactivity Operation 6Recording ToursSetting FastAddress with Alternative Protocols Using an American Dynamics ControllerAlternative Control Protocols Exit Command Lock Enter FastAddressFastAddress 2Using a Pelco Controller New Fast Address Saved Setup MenuSetting FastAddress with a Pelco Keyboard Pelco Protocol Mode Hardware ConfigurationAux On / Aux Off Pelco Keyboard CommandsKeyboard Command User Action Description Pattern Aux OnPreset Special Preset CommandsPreset Command Description Initiates Preset TourPelco On-Screen Menus Command Lock locked Pelco menu Bosch menu Setup MenuBosch Menu locked Pelco Camera Setup Menu provides access to camera settings PTZ Setup unlockedCamera Setup unlocked OutdoorOther Menus Keyboard Commands by Number Zone Title Menu Enters Zone Title menu. Refer to Refer to .8 Azimuth, Elevation, Compass Directions, Locked Function Comm Command Description Key Controlling Alarm Rules Advanced FeaturesAlarm Rules Alarm Rule ExamplesExample 2 Advanced Alarm Rule Click Output Option Example 3 Advanced Alarm Rule using AutoTrackClick the Online Config button and then expand Alarm Select Shot from the Type drop-down listOutput Option 6 Configuration AutoTrack Settings and Recommendations AutoTrack OperationField of View AutoTrack OptimizationMount/Mounting Surface Stability Unwanted MotionPrivacy Masking Setting AutoTrack Optimization ParametersVirtual Masking Consistent Light ConditionsImage Stabilization Preset positions 90 throughMotion Detection with Region of Interest 7Pre-position TourSetting the Azimuth Zero Point 8Azimuth, Elevation, and Compass DirectionsAzimuth Range Compass Direction Displaying Azimuth, Elevation, and Compass Headings AutoHome Recalibration Commands and SettingsFunction Command Description Key Number Readings and the compass heading in the following waySetting Values Using the AutoHome RecalibrationPreset or Recorded Tour AutoHome Recalibration OperationIf O.K., then If there is power to the AutoDome, then Troubleshooting GuideIf O.K., then If using a non-Bosch power supply VG5 AutoDome Operation and ControlSettings If amber LED does not light when given PTZ commands, thenCannot access user No camera controlWith an American Setting FastAddressDoes not switch If O.K., then Automatically when Dynamics KeyboardInside of Outdoor Low Voltage flashingOn monitor display 2VG5 Series AutoDome Audio Audio Connections with an VG5 600 Series AutoDomeProblem Solution No Audio Problem Solution If O.K., then Poor AudioUser Command Table AutoDome 600 Series Analog PTZ Camera User Command Table en Appendix FastAddress Conversions BlockGroup Index NumericsCommand lock 36 Command Lock menu 37 commands Setup Custom tour PTZ En Index AutoDome 600 Series Analog PTZ Camera Page Page Page Bosch Security Systems, Inc