Bosch Appliances VG5 600 user manual Pelco Keyboard Commands, Aux On / Aux Off

34 en Alternative Control ProtocolsAutoDome 600 Series Analog PTZ Camera

4.2.2	Pelco Keyboard Commands
	Pelco control commands are composed of a sequence of two (2) keyboard inputs with the
	following convention: 1) a Command Number and 2) a Function key input.
	The AutoDome uses the PRESET command key to save and recall presets (pre-positions) 1
	through 99.
	NOTICE!
	To save a preset, enter the desired number and hold the PRESET key for approximately two
	(2) seconds. To recall a preset, enter the desired preset number (or command) and
	momentarily press and release the PRESET key.

4.2.3	Pelco Keyboard Commands
		Keyboard Command	User Action	Description
		0-Pattern	Press	Initiates recording continuous playback based upon
				current Recording setting (A or B) in the Setup
				Menu.
			Press and hold	Initiates recording based upon current Recording
				setting (A or B) in the Setup Menu. Press ACK to end
				recording.
		1-Pattern	Press	Initiate Recording A continuous playback.
			Press and hold	Initiate Recording A. Press ACK to end recording.
		2-Pattern	Press	Initiate Recording B continuous playback.
			Press and hold	Initiate Recording B. Press ACK to end recording.
		3-Pattern	Press	Initiate the AutoDome standard preset tour (Tour 1).
		4-Pattern	Press	Initiate the AutoDome custom preset tour (Tour 2).
		1 – Aux On / Aux Off	Press	Activates / deactivates alarm output 1.
		2 – Aux On / Aux Off	Press	Activates / deactivates alarm output 2.
		3 – Aux On / Aux Off	Press	Activates / deactivates alarm output 3.
		4 – Aux On / Aux Off	Press	Activates / deactivates alarm relay.
		91 – Aux On	Press	Activate Zone Scan (display zone titles).
		92 – Aux On	Press	Deactivate Zone Scan (re-move zone titles)

F.01U.270.005 2.0 2012.06 User Manual Bosch Security Systems, Inc.