Bosch Appliances VG5 600 user manual Virtual Masking, Privacy Masking, Consistent Light Conditions

Page 50

50 en Advanced Features

AutoDome 600 Series Analog PTZ Camera

 

 

Setting AutoTrack Optimization Parameters

1.Press OFF-90-ENTERto turn off the command lock.?

2.Press ON-46-ENTERto access the Main Menu.?

3.Use the joystick to highlight the Advanced menu.?

4.Select the AutoTrack Sensitivity option and change the parameter to Auto or to a value between 1–10.?

5.Exit the AutoTrack Sensitivity menu. Then, exit the Advanced Feature Setup menu.

6.Access the PTZ Setup menu.

7.Select the AutoPan option and change the parameter to one of the suggested values in the table above.

8.Exit the AutoPan menu. Then, exit the PTZ Setup menu and finally exit the Main menu.

Consistent Light Conditions

You may use higher AutoPan speeds in consistent indoor or outdoor ambient light conditions, but Bosch recommends not exceeding a speed of more than 15 degrees/sec. Then modify the AutoTrack Sensitivity setting to reach the optimal results.

7.3

Virtual Masking

Virtual Masking is a unique Bosch technology that allows you to create an “invisible” area that ignores unwanted background motion. These invisible masks are similar to privacy zones, except that the AutoDome AutoTrack and Motion Detection algorithms can see them.

–To configure a Virtual Mask, open the Main menu, select the Advanced menu, then select Virtual Masking. To setup a Virtual Mask follow the on-screen menu instructions.

–In Pelco Mode, open the Main menu, select the Advanced menu, then select Virtual Masking. To setup a Virtual Mask follow the on-screen menu instructions.

 

NOTICE!

 

Draw the mask 10% larger than the object to ensure that the mask completely covers the

 

object as the AutoDome zooms in and out.

 

 

7.4

Privacy Masking

 

Privacy Masking is used to block out a specific area of a scene from being viewed. Mask

choices include black, white, or blurred, and can be configured with three, four, or five corners to cover more complex shapes.

NOTICE!

Privacy Masking does not hinder AutoTrack from tracking an object.

–To configure a Privacy Mask, open the Main menu, select Display Setup, and then select Privacy Mask. Alternatively, enter the keyboard command ON-87-ENTER. To setup a privacy mask, follow the on-screen menu instructions.

–In Pelco Mode open the Pelco Main menu, open the Bosch menu, select the Display Setup menu, and finally select Privacy Masking. To setup a privacy mask, follow the on- screen menu instructions.

NOTICE!

Draw the mask 10% larger than the object to ensure that the mask completely covers the object as the AutoDome zooms in and out.

F.01U.270.005 2.0 2012.06

User Manual

Bosch Security Systems, Inc.

Page 49 Page 51
Image 50
Page 49 Page 51
Contents AutoDome 600 Series Analog PTZ Cam- era Page Table of Contents Troubleshooting Guide Bosch Menu locked PTZ Setup unlocked Other MenusKeyboard Commands by Number Advanced Features User Command Table Appendix FastAddress Conversions IndexEstablishing AutoDome Control Powering OnGetting Started For each of the system componentsLCD Keyboard CommandsBasic Keyboard Operation To set an address for a camera without an address Setting the Camera AddressFastAddress To change or clear an address for a camera with an addressPassword Security Level Setting PasswordsSpecial Passwords To set or change a password locked commandSetup Menu Setup MenuTo open the main Setup Menu locked command On-Screen Display Menu NavigationCamera Setup Menu Internal ATWAuto OFFExit Auto Focus Lens SetupPAL Auto IrisConstant PTZ Setup MenuSpot FastNormal Display Setup Menu MomentaryPrivacy Masking Edit Scene Title to accessSector 1-16 Press Focus/Iris to blank or Edit Sector TitleCommunication Setup Menu Inputs Alarm I/O SetupAlarm I/O Setup Inputs Setup NoneAlarm Relay Outputs Setup MenuOutputs Setup OutputsRule Rule Setup MenuRule Setup None Language Menu Advanced Feature Setup MenuAdvanced Feature Setup Diagnostics Menu Bist 11.1 Alarm Status Submenu 2Setting Preset Shots Common AutoDome User Commands unlockedSetting AutoPan Mode To start Preposition Tour 4Configuring Preposition ToursSpecifying a Shot or a Sector Title To stop a Preposition Tour5Programming the Inactivity Operation 6Recording ToursAlternative Control Protocols Setting FastAddress with Alternative ProtocolsUsing an American Dynamics Controller Exit Command Lock Enter FastAddressFastAddress Setting FastAddress with a Pelco Keyboard 2Using a Pelco ControllerNew Fast Address Saved Setup Menu Pelco Protocol Mode Hardware ConfigurationAux On / Aux Off Pelco Keyboard CommandsKeyboard Command User Action Description Pattern Aux OnPreset Special Preset CommandsPreset Command Description Initiates Preset TourPelco On-Screen Menus Bosch Menu locked Command Lock lockedPelco menu Bosch menu Setup Menu Pelco Camera Setup Menu provides access to camera settings PTZ Setup unlockedCamera Setup unlocked OutdoorOther Menus Keyboard Commands by Number Zone Title Menu Enters Zone Title menu. Refer to Refer to .8 Azimuth, Elevation, Compass Directions, Locked Function Comm Command Description Key Controlling Alarm Rules Advanced FeaturesAlarm Rules Alarm Rule ExamplesExample 2 Advanced Alarm Rule Click Output Option Example 3 Advanced Alarm Rule using AutoTrackClick the Online Config button and then expand Alarm Select Shot from the Type drop-down listOutput Option 6 Configuration AutoTrack Settings and Recommendations AutoTrack OperationField of View AutoTrack OptimizationMount/Mounting Surface Stability Unwanted MotionPrivacy Masking Setting AutoTrack Optimization ParametersVirtual Masking Consistent Light ConditionsImage Stabilization Preset positions 90 throughMotion Detection with Region of Interest 7Pre-position TourAzimuth Range Compass Direction Setting the Azimuth Zero Point8Azimuth, Elevation, and Compass Directions Displaying Azimuth, Elevation, and Compass Headings AutoHome Recalibration Commands and SettingsFunction Command Description Key Number Readings and the compass heading in the following waySetting Values Using the AutoHome RecalibrationPreset or Recorded Tour AutoHome Recalibration OperationIf O.K., then If there is power to the AutoDome, then Troubleshooting GuideIf O.K., then If using a non-Bosch power supply VG5 AutoDome Operation and ControlSettings If amber LED does not light when given PTZ commands, thenCannot access user No camera controlWith an American Setting FastAddressDoes not switch If O.K., then Automatically when Dynamics KeyboardOn monitor display Inside of OutdoorLow Voltage flashing 2VG5 Series AutoDome Audio Audio Connections with an VG5 600 Series AutoDomeProblem Solution No Audio Problem Solution If O.K., then Poor AudioUser Command Table AutoDome 600 Series Analog PTZ Camera User Command Table en Group Appendix FastAddress ConversionsBlock Index NumericsCommand lock 36 Command Lock menu 37 commands Setup Custom tour PTZ En Index AutoDome 600 Series Analog PTZ Camera Page Page Page Bosch Security Systems, Inc
Top Page Image Contents