AutoDome 600 Series Analog PTZ CameraAdvanced Features en 49
– Mount/Mounting Surface Stability
– Mount the camera in the most stable position. Avoid locations affected by vibrations,
such as those caused by a
– Use the pendant arm mount, if possible. This mount option provides the most stability for the camera.
– Use guy wires to protect against strong winds if using the parapet mount.
– Field of View
– Select a location and viewing angle that allows the flow of people to move across the camera’s field of view.
– Avoid motion that moves directly towards the camera.
– Avoid locations that attract large numbers of people, such as retail stores or intersections.
– Unwanted Motion
– Use the Virtual Masking feature (see Section 7.3 Virtual Masking, page 50) to mask unwanted motion from trees or cars.
Bosch recommends that you draw the virtual mask 10% larger than the object to be masked.
– Avoid neon lights, flashing lights, night time lights, and reflected light (from a window or mirror, for example). The flickering of these lights can affect the AutoTrack operation. Use a Virtual Mask to hide these type of lights if they cannot be avoided.
– Check the virtual mask periodically to ensure that it still covers the entire object to be masked. Adjust the mask if necessary.
7.2.2 | AutoTrack Optimization | |||
|
| The AutoDome achieves optimum tracking performance when the focal length of the lens | ||
|
| during AutoPan is as close to the focal length of the lens during an AutoTrack operation. The | ||
|
| ambient light conditions also affect the AutoTrack performance. | ||
|
| Dynamic Light Conditions |
|
|
|
| The ambient lighting conditions affect AutoTrack performance, especially in outdoor dynamic | ||
|
| lighting conditions that change daily or hourly. To optimize the AutoTrack performance under | ||
|
| changing light conditions, Bosch recommends that you configure the AutoTrack Sensitivity | ||
|
| and the AutoPan speeds. |
|
|
|
| Bosch recommends setting the AutoTrack Sensitivity to Auto and suggests the following | ||
|
| AutoPan speed for outdoor conditions: | ||
|
|
|
|
|
|
| Camera Focal Length | Maximum Suggested AutoPan Speed |
|
|
|
| (degrees/sec) |
|
|
|
|
|
|
|
| 5 |
| |
|
|
|
|
|
|
| 2 |
| |
|
|
|
|
|
|
| 1 |
| |
|
|
|
|
|
If you need a higher AutoPan speed, set the AutoTrack Sensitivity to a value between 1 and 10 in the Advanced Feature Setup menu.
Bosch Security Systems, Inc. | User Manual | F.01U.270.005 2.0 2012.06 |