Panasonic WV-SP105 Configure the settings relating to H.264 images JPEG/H.264, 264 1 · H.264

Page 20

[Image quality]

Specify the image quality of JPEG images.

0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low Default: 5 Normal

Configure the settings relating to H.264 images [JPEG/H.264]

Click the [JPEG/H.24] tab on the "Image" page. (Pages 13 and 14: How to display/operate the setup menu) Configure the settings relating to H.264 image such as "Max bit rate (per client)*", "Image capture size", "Image quality", etc. in this section.

Refer to page 19 for further information about the settings relating to JPEG images.

H.264 (1) · H.264 (2)

[H.264 transmission]

Select "On" or "Off" to determine whether or not to transmit H.264 images.

On: Transmits H.264 images.

Off: Does not transmit H.264 images.

Default: On

Note:

• When "On" is selected for "H.264 transmission" in "H.264(1)", displaying of H.264 images or JPEG images on the "Live" page will be available.

• When "On" is selected for "H.264 transmission" in "H.264(1)" and "H.264(2)", H.264 images are view- able using other devices with each setting.

• When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)", the transmission interval of JPEG images may sometimes become longer.

[Internet mode (over HTTP)]

Select "On" when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without changing the broadband router settings configured for JPEG image transmission.

On: H.264 images will be transmitted using the HTTP port. Refer to page 45 for further information about the HTTP port number settings.

Off: H.264 images will be transmitted using the UDP port.

Default: Off

20

Image 20
Contents Model No. WV-SP105, WV-SP102 WV-SP105E, WV-SP102E Operating InstructionsContents Preface About notationsTrademarks and registered trademarks AbbreviationsViewer software Example of IPv4 access Example of IPv6 accessMonitor images on a PC Monitor images from a single cameraRefresh interval of Jpeg images About the Live Alarm occurrence indication button*2 Zoom buttonsBrightness buttons*2 + brighter button Image will be brighter Camera titleMonitor images from multiple cameras Action at an alarm occurrence Alarm typeAction at an alarm occurrence Notify of alarm occurrences by e-mailTransmit images onto an FTP server About the network security Equipped security functionsDisplay the setup menu from a PC How to display the setup menuHow to operate the setup menu About the setup menu window 1Maintenance button 4Setup0Schedule button 2Help buttonConfigure the basic settings Basic Default On Link/Access indicator Default On Power indicator greenLink indicator orange Access indicator GreenConfigure the settings relating to Jpeg images JPEG/H.264 Default 1280x960*1Aspect ratio Refresh interval JpegConfigure the settings relating to H.264 images JPEG/H.264 264 1 · H.264Default 30fps Default NormalImage capture size Transmission priorityDefault Multicast TTL/HOPLimit*2 Available value 1 DefaultRefresh interval Transmission typePrivacy zone Image adjustExtra zoom SP105 Back light compensationBLC Default Off Mask areaAdaptive black stretch Light control mode Default OnHigh Auto slow shutterSimple black & white mode Default Off White balanceDefault ATW1 Default Blue gainDefault High Chroma gain level Default Pedestal levelSet mask areas Reset button Extra zoom+ button − buttonDisplay type Default Off Setup buttonArea Available number of characters 1 128 characters IP addressExample of entry Alarm Configure the alarm settings AlarmConfigure the settings relating to the alarm action Alarm Configure the settings relating to the alarm image Alarm Alarm imageConfigure the VMD settings VMD area Information addition VMD information additionLight detection control Set the VMD areas VMD area Mail notification Destination of notificationPanasonic alarm protocol notification Panasonic alarm protocolAvailable range 1 Default Retry times Destination portPassword Retype password Access levelUser auth Available number of characters 4 32 charactersHost auth Default Off IP addressHost check Default 1280×960*1 VGA*2 Priority streamActivation Destination IP addressConfigure the settings relating to the mail server Mail Configure the settings relating to the FTP server FTP Configure the settings relating to the NTP server NTP Time adjustmentDefault Time adjustment interval Default 1hIPv4 network Configure the network settings NetworkConfigure the network settings Network IPv6 network CommonEasy IP Setup accommodate period Default 20minConfigure the settings relating to Ddns Ddns Default Off Host nameAccess interval Available number of characters 1 64 charactersConfigure the settings relating to Snmp Snmp Default Off Directory name Default 1sFTP periodic image transmission FTP periodic image transmissionHow to set the schedules How to delete the set schedule Configure the settings relating to the schedules Schedule Maintenance of the camera Maintenance Error descriptionCheck the system log System log Time & dateUpgrade the firmware Upgrade Reboot Reset the settings/Reboot the camera Default resetReset to the default and load the default Html files Viewing Help Displaying the Help screenAbout the displayed system log Category Indication DescriptionError indications relating to Ddns Error indications relating to loginBrowser TroubleshootingCannot access from the web No image is displayed Alarm occurrence indication No indicator lightsImage is not being refreshed No image is displayed or tooWhen displaying H.264 images Following message is dis Played on the information barPop-up blocked. To see this Pop-up or additional optionsPanasonic Canada Inc