Configure the settings relating to the priority stream [System]
Click the [System] tab on the "User mng." page. (☞ Pages 13 and 14: How to display/operate the setup menu) The description below is the configuration of the priority stream that can transmit images without deteriorating the image quality and refresh interval even when multiple users access concurrently.
■Priority stream
[Activation]
Select "On" or "Off" to determine whether or not to use the priority stream.
Default: Off
Note:
•When "On" is selected for "Activation" of "Priority stream", number of users who can access the unit may be limited.
[Destination IP address (1)]
Enter the first destination IP address.
[Destination IP address (2)]
Enter the second destination IP address.
[Stream type]
Select either "JPEG", "H.264(1)" or "H.264(2)". JPEG: JPEG images will be transmitted. H.264(1): H.264(1) images will be transmitted. H.264(2): H.264(2) images will be transmitted. Default: JPEG
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when "JPEG" is selected for "Stream type".
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps* (PAL model)/ 15fps*/ 30fps* Default: 1fps
Note:
•When "On" is selected for "H.264 transmission", the refresh interval may be longer than the set value when any value with an asterisk (*) on the right is selected.
[Image capture size]
Select the image capture size from the following. When "4:3" is selected for "Aspect ratio"
QVGA/ VGA/ 1280x960*1
When "16:9" is selected for "Aspect ratio" 320x180/ 640x360/ 1280x720*1
This setting is validated only when "JPEG" is selected for "Stream type".
Default: 1280×960*1 VGA*2
*1 SP105
*2 SP102
40