Panasonic WV-SP105E Maintenance of the camera Maintenance, Check the system log System log

Page 53

Maintenance of the camera [Maintenance]

System log check, firmware upgrade, and initialization of the setup menu can be performed on this page. The "Maintenance" page has 3 tabs; the [System log] tab, the [Upgrade] tab and the [Default reset] tab.

Check the system log [System log]

Up to 100 system logs can be saved on the built-in memory of the camera.

When the saved system logs have reached the maximum number, the newer logs will overwrite the older system logs. In this case, the oldest log is the first to be overwritten.

When the power of the camera is turned off, logs will be deleted.

[No.]

The serial number of the system log will be displayed.

[Time & date]

Time and date at the error occurrence will be displayed.

Note:

When "Off" is selected for "Time display format" on the [Basic] tab (page 17), time & date of logs will be displayed in 24-hour format.

[Error description]

The descriptions about the error will be displayed. Refer to page 57 for further information about the sys- tem logs.

53

Image 53
Contents Operating Instructions Model No. WV-SP105, WV-SP102 WV-SP105E, WV-SP102EContents About notations PrefaceTrademarks and registered trademarks AbbreviationsViewer software Example of IPv6 access Example of IPv4 accessMonitor images on a PC Monitor images from a single cameraRefresh interval of Jpeg images About the Live Zoom buttons Alarm occurrence indication button*2Brightness buttons*2 + brighter button Image will be brighter Camera titleMonitor images from multiple cameras Alarm type Action at an alarm occurrenceAction at an alarm occurrence Notify of alarm occurrences by e-mailTransmit images onto an FTP server Equipped security functions About the network securityHow to display the setup menu Display the setup menu from a PCHow to operate the setup menu About the setup menu window 4Setup 1Maintenance button0Schedule button 2Help buttonConfigure the basic settings Basic Default On Power indicator green Default On Link/Access indicatorLink indicator orange Access indicator GreenDefault 1280x960*1 Configure the settings relating to Jpeg images JPEG/H.264Aspect ratio Refresh interval Jpeg264 1 · H.264 Configure the settings relating to H.264 images JPEG/H.264Default Normal Default 30fpsImage capture size Transmission priorityAvailable value 1 Default Default Multicast TTL/HOPLimit*2Refresh interval Transmission typePrivacy zone Image adjustExtra zoom SP105 Back light compensationBLC Default Off Mask areaAdaptive black stretch Default OnHigh Auto slow shutter Light control modeSimple black & white mode Default Off White balanceDefault Blue gain Default ATW1Default High Chroma gain level Default Pedestal levelSet mask areas Extra zoom Reset button+ button − buttonDisplay type Default Off Setup buttonArea Available number of characters 1 128 characters IP addressExample of entry Alarm Configure the alarm settings AlarmConfigure the settings relating to the alarm action Alarm Alarm image Configure the settings relating to the alarm image AlarmConfigure the VMD settings VMD area Information addition VMD information additionLight detection control Set the VMD areas VMD area Destination of notification Mail notificationPanasonic alarm protocol Panasonic alarm protocol notificationAvailable range 1 Default Retry times Destination portAccess level Password Retype passwordUser auth Available number of characters 4 32 charactersHost auth Default Off IP addressHost check Priority stream Default 1280×960*1 VGA*2Activation Destination IP addressConfigure the settings relating to the mail server Mail Configure the settings relating to the FTP server FTP Time adjustment Configure the settings relating to the NTP server NTPDefault Time adjustment interval Default 1hIPv4 network Configure the network settings NetworkConfigure the network settings Network Common IPv6 networkDefault 20min Easy IP Setup accommodate periodDefault Off Host name Configure the settings relating to Ddns DdnsAccess interval Available number of characters 1 64 charactersConfigure the settings relating to Snmp Snmp Default 1s Default Off Directory nameFTP periodic image transmission FTP periodic image transmissionHow to set the schedules How to delete the set schedule Configure the settings relating to the schedules Schedule Error description Maintenance of the camera MaintenanceCheck the system log System log Time & dateUpgrade the firmware Upgrade Reboot Reset the settings/Reboot the camera Default resetReset to the default and load the default Html files Displaying the Help screen Viewing HelpCategory Indication Description About the displayed system logError indications relating to login Error indications relating to DdnsBrowser TroubleshootingCannot access from the web No image is displayed No indicator lights Alarm occurrence indicationImage is not being refreshed No image is displayed or tooWhen displaying H.264 images Played on the information bar Following message is disPop-up blocked. To see this Pop-up or additional optionsPanasonic Canada Inc