Panasonic WV-SP102E, WV-SP105 Configure the settings relating to Ddns Ddns, Default Off Host name

Page 47

Configure the settings relating to DDNS [DDNS]

Click the [DDNS] tab on the "Network" page. (Pages 13 and 14: How to display/operate the setup menu)

When using the DDNS function, it is possible to access with "Host name registered in the DDNS server.nmdns.net". To use the DDNS function, it is necessary to connect to the dedicated DDNS server. Refer to the web site for further information about the DDNS. Refer to the readme file on the provided CD-ROM for the web site address.

It is necessary to configure the host name, user name and password registered in the DDNS server.

[DDNS]

Select "On" or "Off" to determine whether or not to use the DDNS function.

Default: Off

[Host name]

Enter the host name to be used.

Available number of characters: 1 - 64 characters

Default: None (blank)

[User name]

Enter the user name (login name) to access the DDNS server.

Available number of characters: 1 - 32 characters

Default: None (blank)

[Password]

Enter the password to access the DDNS server.

Available number of characters: 0 - 32 characters

Default: None (blank)

[Access interval]

Select the interval to access the DDNS server to check the IP address and the host name from the following. 1min/ 10min/ 30min/ 1h/ 6h/ 24h

Default: 1h

47

Image 47
Contents Operating Instructions Model No. WV-SP105, WV-SP102 WV-SP105E, WV-SP102EContents Abbreviations PrefaceAbout notations Trademarks and registered trademarksViewer software Monitor images from a single camera Example of IPv4 accessExample of IPv6 access Monitor images on a PCRefresh interval of Jpeg images About the Live + brighter button Image will be brighter Camera title Alarm occurrence indication button*2Zoom buttons Brightness buttons*2Monitor images from multiple cameras Notify of alarm occurrences by e-mail Action at an alarm occurrenceAlarm type Action at an alarm occurrenceTransmit images onto an FTP server Equipped security functions About the network securityHow to display the setup menu Display the setup menu from a PCHow to operate the setup menu About the setup menu window 2Help button 1Maintenance button4Setup 0Schedule buttonConfigure the basic settings Basic Access indicator Green Default On Link/Access indicatorDefault On Power indicator green Link indicator orangeRefresh interval Jpeg Configure the settings relating to Jpeg images JPEG/H.264Default 1280x960*1 Aspect ratio264 1 · H.264 Configure the settings relating to H.264 images JPEG/H.264Transmission priority Default 30fpsDefault Normal Image capture sizeTransmission type Default Multicast TTL/HOPLimit*2Available value 1 Default Refresh intervalPrivacy zone Image adjustExtra zoom SP105 Back light compensationBLC Default Off Mask areaAdaptive black stretch Default Off White balance Light control modeDefault OnHigh Auto slow shutter Simple black & white modeDefault Pedestal level Default ATW1Default Blue gain Default High Chroma gain levelSet mask areas − button Reset buttonExtra zoom + buttonDisplay type Default Off Setup buttonArea Available number of characters 1 128 characters IP addressExample of entry Alarm Configure the alarm settings AlarmConfigure the settings relating to the alarm action Alarm Alarm image Configure the settings relating to the alarm image AlarmConfigure the VMD settings VMD area Information addition VMD information additionLight detection control Set the VMD areas VMD area Destination of notification Mail notificationDestination port Panasonic alarm protocol notificationPanasonic alarm protocol Available range 1 Default Retry timesAvailable number of characters 4 32 characters Password Retype passwordAccess level User authHost auth Default Off IP addressHost check Destination IP address Default 1280×960*1 VGA*2Priority stream ActivationConfigure the settings relating to the mail server Mail Configure the settings relating to the FTP server FTP Default 1h Configure the settings relating to the NTP server NTPTime adjustment Default Time adjustment intervalIPv4 network Configure the network settings NetworkConfigure the network settings Network Common IPv6 networkDefault 20min Easy IP Setup accommodate periodAvailable number of characters 1 64 characters Configure the settings relating to Ddns DdnsDefault Off Host name Access intervalConfigure the settings relating to Snmp Snmp FTP periodic image transmission Default Off Directory nameDefault 1s FTP periodic image transmissionHow to set the schedules How to delete the set schedule Configure the settings relating to the schedules Schedule Time & date Maintenance of the camera MaintenanceError description Check the system log System logUpgrade the firmware Upgrade Reboot Reset the settings/Reboot the camera Default resetReset to the default and load the default Html files Displaying the Help screen Viewing HelpCategory Indication Description About the displayed system logError indications relating to login Error indications relating to DdnsBrowser TroubleshootingCannot access from the web No image is displayed No image is displayed or too Alarm occurrence indicationNo indicator lights Image is not being refreshedWhen displaying H.264 images Pop-up or additional options Following message is disPlayed on the information bar Pop-up blocked. To see thisPanasonic Canada Inc