Panasonic WV-SP105E, WV-SP102 About the network security, Equipped security functions

Page 12

About the network security

Equipped security functions

The following security functions are featured in this camera.

qAccess restrictions by the host authentication and the user authentication

It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to "On". (Pages 38 and 39)

wAccess restrictions by changing the HTTP port

It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port number. (Page 45)

Important:

Design and enhance security countermeasures to prevent leakage of information such as image data, authenti- cation information (user name and password), alarm mail information, FTP server information, DDNS server information, etc. Perform the countermeasure such as the access restriction using the user authentication.

After the camera is accessed by the administrator, make sure to close the browser for added security.

Change the administrator password periodically for added security.

Note:

When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the same IP address (PC), access to the camera will be denied for a while.

12

Image 12
Contents Model No. WV-SP105, WV-SP102 WV-SP105E, WV-SP102E Operating InstructionsContents Preface About notationsTrademarks and registered trademarks AbbreviationsViewer software Example of IPv4 access Example of IPv6 accessMonitor images on a PC Monitor images from a single cameraRefresh interval of Jpeg images About the Live Alarm occurrence indication button*2 Zoom buttonsBrightness buttons*2 + brighter button Image will be brighter Camera titleMonitor images from multiple cameras Action at an alarm occurrence Alarm typeAction at an alarm occurrence Notify of alarm occurrences by e-mailTransmit images onto an FTP server About the network security Equipped security functionsDisplay the setup menu from a PC How to display the setup menuHow to operate the setup menu About the setup menu window 1Maintenance button 4Setup0Schedule button 2Help buttonConfigure the basic settings Basic Default On Link/Access indicator Default On Power indicator greenLink indicator orange Access indicator GreenConfigure the settings relating to Jpeg images JPEG/H.264 Default 1280x960*1Aspect ratio Refresh interval JpegConfigure the settings relating to H.264 images JPEG/H.264 264 1 · H.264Default 30fps Default NormalImage capture size Transmission priorityDefault Multicast TTL/HOPLimit*2 Available value 1 DefaultRefresh interval Transmission typeImage adjust Extra zoom SP105Privacy zone Default Off Mask area Adaptive black stretchBack light compensationBLC Light control mode Default OnHigh Auto slow shutterSimple black & white mode Default Off White balanceDefault ATW1 Default Blue gainDefault High Chroma gain level Default Pedestal levelSet mask areas Reset button Extra zoom+ button − buttonDefault Off Setup button AreaDisplay type IP address Example of entryAvailable number of characters 1 128 characters Configure the alarm settings Alarm Configure the settings relating to the alarm action AlarmAlarm Configure the settings relating to the alarm image Alarm Alarm imageConfigure the VMD settings VMD area VMD information addition Light detection controlInformation addition Set the VMD areas VMD area Mail notification Destination of notificationPanasonic alarm protocol notification Panasonic alarm protocolAvailable range 1 Default Retry times Destination portPassword Retype password Access levelUser auth Available number of characters 4 32 charactersDefault Off IP address Host checkHost auth Default 1280×960*1 VGA*2 Priority streamActivation Destination IP addressConfigure the settings relating to the mail server Mail Configure the settings relating to the FTP server FTP Configure the settings relating to the NTP server NTP Time adjustmentDefault Time adjustment interval Default 1hConfigure the network settings Network Configure the network settings NetworkIPv4 network IPv6 network CommonEasy IP Setup accommodate period Default 20minConfigure the settings relating to Ddns Ddns Default Off Host nameAccess interval Available number of characters 1 64 charactersConfigure the settings relating to Snmp Snmp Default Off Directory name Default 1sFTP periodic image transmission FTP periodic image transmissionHow to set the schedules How to delete the set schedule Configure the settings relating to the schedules Schedule Maintenance of the camera Maintenance Error descriptionCheck the system log System log Time & dateUpgrade the firmware Upgrade Reset the settings/Reboot the camera Default reset Reset to the default and load the default Html filesReboot Viewing Help Displaying the Help screenAbout the displayed system log Category Indication DescriptionError indications relating to Ddns Error indications relating to loginTroubleshooting Cannot access from the webBrowser No image is displayed Alarm occurrence indication No indicator lightsImage is not being refreshed No image is displayed or tooWhen displaying H.264 images Following message is dis Played on the information barPop-up blocked. To see this Pop-up or additional optionsPanasonic Canada Inc