Panasonic WV-SP102, WV-SP105 User auth, Password Retype password, Access level, User check

Page 38

Configure the settings relating to the authentication [User mng.]

The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con- figured on the "User mng." page.

The "User mng." page has 3 tabs; the [User auth.] tab, the [Host auth.] tab and the [System] tab.

Configure the settings relating to the user authentication [User auth.]

Click the [User auth.] tab on the "User mng." page. (Pages 13 and 14: How to display/operate the setup menu) The settings relating to the user authentication can be configured on this page. Up to 18 users can be registered.

Note:

When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the same IP address (PC), access to the unit will be denied for a while.

[User auth.]

Select "On" or "Off" to determine whether or not to authenticate the users.

Default: Off

[User name] Enter a user name.

Available number of characters: 1 - 32 characters

Default: None (blank)

[Password] [Retype password]

Enter a password.

Available number of characters: 4 - 32 characters

Default: None (blank)

Note:

When the user name already in use is entered and the [Set] button is clicked, the respective user infor- mation will be overwritten.

[Access level]

Select the access level of the user from the following.

1.Administrator: Allowed all available operations of the camera.

2.Camera control: Allowed to display images from the camera, to perform the brightness control for the camera and to hide the alarm occurrence indication button. The camera setting configuration is unavail- able.

3.Live only: Only displaying live images is available.

The camera setting configuration and camera con- trol are unavailable.

Default: 3. Live only

[User check]

By clicking [C] of "User check", the registered user can be selected and the selected user’s information can be checked.

The registered user will be displayed with the access level.

(Example: admin [1])

To delete the registered user, click the [Delete] button after selecting the user to be deleted.

38

Image 38
Contents Model No. WV-SP105, WV-SP102 WV-SP105E, WV-SP102E Operating InstructionsContents Trademarks and registered trademarks PrefaceAbout notations AbbreviationsViewer software Monitor images on a PC Example of IPv4 accessExample of IPv6 access Monitor images from a single cameraRefresh interval of Jpeg images About the Live Brightness buttons*2 Alarm occurrence indication button*2Zoom buttons + brighter button Image will be brighter Camera titleMonitor images from multiple cameras Action at an alarm occurrence Action at an alarm occurrenceAlarm type Notify of alarm occurrences by e-mailTransmit images onto an FTP server About the network security Equipped security functionsDisplay the setup menu from a PC How to display the setup menuHow to operate the setup menu About the setup menu window 0Schedule button 1Maintenance button4Setup 2Help buttonConfigure the basic settings Basic Link indicator orange Default On Link/Access indicatorDefault On Power indicator green Access indicator GreenAspect ratio Configure the settings relating to Jpeg images JPEG/H.264Default 1280x960*1 Refresh interval JpegConfigure the settings relating to H.264 images JPEG/H.264 264 1 · H.264Image capture size Default 30fpsDefault Normal Transmission priorityRefresh interval Default Multicast TTL/HOPLimit*2Available value 1 Default Transmission typePrivacy zone Image adjustExtra zoom SP105 Back light compensationBLC Default Off Mask areaAdaptive black stretch Simple black & white mode Light control modeDefault OnHigh Auto slow shutter Default Off White balanceDefault High Chroma gain level Default ATW1Default Blue gain Default Pedestal levelSet mask areas + button Reset buttonExtra zoom − buttonDisplay type Default Off Setup buttonArea Available number of characters 1 128 characters IP addressExample of entry Alarm Configure the alarm settings AlarmConfigure the settings relating to the alarm action Alarm Configure the settings relating to the alarm image Alarm Alarm imageConfigure the VMD settings VMD area Information addition VMD information additionLight detection control Set the VMD areas VMD area Mail notification Destination of notificationAvailable range 1 Default Retry times Panasonic alarm protocol notificationPanasonic alarm protocol Destination portUser auth Password Retype passwordAccess level Available number of characters 4 32 charactersHost auth Default Off IP addressHost check Activation Default 1280×960*1 VGA*2Priority stream Destination IP addressConfigure the settings relating to the mail server Mail Configure the settings relating to the FTP server FTP Default Time adjustment interval Configure the settings relating to the NTP server NTPTime adjustment Default 1hIPv4 network Configure the network settings NetworkConfigure the network settings Network IPv6 network CommonEasy IP Setup accommodate period Default 20minAccess interval Configure the settings relating to Ddns DdnsDefault Off Host name Available number of characters 1 64 charactersConfigure the settings relating to Snmp Snmp FTP periodic image transmission Default Off Directory nameDefault 1s FTP periodic image transmissionHow to set the schedules How to delete the set schedule Configure the settings relating to the schedules Schedule Check the system log System log Maintenance of the camera MaintenanceError description Time & dateUpgrade the firmware Upgrade Reboot Reset the settings/Reboot the camera Default resetReset to the default and load the default Html files Viewing Help Displaying the Help screenAbout the displayed system log Category Indication DescriptionError indications relating to Ddns Error indications relating to loginBrowser TroubleshootingCannot access from the web No image is displayed Image is not being refreshed Alarm occurrence indicationNo indicator lights No image is displayed or tooWhen displaying H.264 images Pop-up blocked. To see this Following message is disPlayed on the information bar Pop-up or additional optionsPanasonic Canada Inc