Configure the settings relating to the FTP server [FTP]
Click the [FTP] tab on the "Server" page. (☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
[FTP server address]
Enter the IP address or the host name of the FTP server.
Available number of characters: 1 - 128 characters
Important:
•When entering the host name for "FTP server address", it is necessary to configure the DNS set- tings on the [Network] tab of the "Network" page. (☞ Page 45)
[User name]
Enter the user name (login name) to access the FTP server.
Available number of characters: 1 - 32 characters
[Password]
Enter the password to access the FTP server.
Available number of characters: 0 - 32 characters
[Control port]
Enter a control port number to be used for the FTP server.
Refer to the help window to infomation about the unavailable port number.
Available port number: 1-65535
Default: 21
[FTP mode]
Select "Passive" or "Active" for the FTP mode. Normally, select "Passive".When it is impossible to con- nect after select "Passive", try to connect after select- ing "Active".
Default: Passive
42