Configure the alarm settings [Alarm]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the VMD area settings, and the alarm occurrence notification can be configured on this page.
The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
Configure the settings relating to the alarm action [Alarm]
Click the [Alarm] tab on the "Alarm" page. (☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to the alarm can be configured in this section.
■Alarm
[VMD alarm]
When clicking "VMD >>", the [VMD area] tab of the "Alarm" page will be displayed.
[Command alarm]
Select "On" or "Off" to determine whether or not to receive the command alarm.
The command alarm is the function that provides notifi- cation of a Panasonic protocol alarm from the other cameras. When "On" is selected, alarm actions will be performed between multiple cameras.
Default: Off
[Originating port number]
Select a port number to be used to receive the com- mand alarm.
Refer to the help window to infomation about the unavailable port number.
Available range: 1 - 65535
Default: 8181
31