Panasonic WV-SP102 Default ATW1, Red gain, Default Blue gain, Default High Chroma gain level

ATW1: Selects the automatic tracing white balance mode. The camera will constantly check the color temperature of the light source and adjust the white balance automatically. Operating color temperature range is approx. 2700 K - 6000 K.

ATW2: Selects the automatic tracing white balance mode under a sodium lamp. The camera will adjust the white balance automatically under a sodium lamp. Operating color temperature range is approx. 2000 K - 6000 K.

AWC: Selects the automatic white balance control mode. This adjustment is suitable for a location where a light source is stable. Operating color tem- perature range is approx. 2000 K - 10000 K.

Default: ATW1

Note:

•Under the following conditions, color may not be faithfully processed. In these cases, select "AWC".

•When shooting a subject whose major part is a thick color

•When shooting blue sky or sun at sunset

•When shooting a subject whose luminance is too low

•When "AWC" is selected, click the [Set] button.

[Red gain]

Adjust the red color of images.

When the cursor is moved in the "+" direction, the red color will become thicker. When the cursor is moved in the "–" direction, the red color will be thinner. Click the [Reset] button to reset the color to the default.

Default: 128

[Blue gain]

Adjust the blue color of images.

When the cursor is moved in the "+" direction, the blue color will become thicker. When the cursor is moved in the "–" direction, the red color will be thinner. Click the [Reset] button to reset the color to the default.

Default: 128

[DNR]

The digital noise reduction function reduces noise auto- matically under the condition of low illuminance. Select an effect level "High" or "Low" for the digital noise reduction.

High: High DNR, afterimage remains

Low: Low DNR, reduces afterimage

Default: High

[Chroma gain level]

Adjusts the chroma level (color density).

When the cursor is moved in the "+" direction, the col- ors will become thicker. When the cursor is moved in the "–" direction, the colors will be thinner. Click the [Reset] button to reset the color to the default. Default: 128

[Aperture level]

Adjust the aperture level (outline compensation). Images will be sharper when the cursor is moved in the "+" direction, and will be softer when the cursor is moved in the "–" direction. Click the [Reset] button to reset the color to the default.

Default: 16

[Pedestal level]

Adjust the black level of images by moving the cursor. When the cursor is moved to the "+" direction, images will become brighter. When the cursor is moved to the "–" direction, images will be darker. Click the [Reset] button to reset the color to the default.

Default: 128

[Close] button

Click this button to quit the "Image adjust" setup menu.

26