■IPv6 network
[Manual]
Select "On" or "Off" to determine whether or not to manually configure the IP address for IPv6 network (IPv6 address).
On: Enter an IPv6 address manually.
Off: Manual entry of an IPv6 address will become unavailable.
Default: Off
[IP address(IPv6)]
When "On" is selected for "Manual", manual entry of the IPv6 address is required.
Do not enter an address already in use.
Note:
•When connecting to the manually configured IPv6 address beyond the router, use an IPv6 compatible router and turn on the automatic IPv6 address assignment function. In this case, it is necessary to configure IPv6 address including prefix information provided from the IPv6 compatible router. Refer to the operating instructions of the router in use for further information.
■Common
[DNS]
Determine how to set the address of the DNS server by selecting "Auto" (obtain the address automatically) or "Manual" (enter the address of the DNS server). When "Manual" is selected, it is necessary to configure the settings for the DNS.
When using the DHCP function, it is possible to obtain the DNS address automatically by selecting "Auto". Refer to the network administrator for further informa- tion about the settings.
Default: Manual
[Primary server address], [Secondary server address]
When "Manual" is selected for "DNS", enter the IP address of the DNS server.
Refer to the network administrator about the IP address of the DNS server.
Note:
•It is impossible to use both an IPv4 DNS server and an IPv6 DNS server.
[HTTP port]
Assign the port numbers independently.
The following port numbers are unavailable since they are already in use.
Available port number: 1-65535
Default: 80
<Port numbers already in use>
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000 - 61000
[Line speed]
Select the line speed for data transmission from the fol- lowing. It is recommended to use with the default "Auto".
Auto: Line speed will be applied automatically.
Default: Auto
[FTP access to camera]
Select "Allow" or "Forbid" to determine whether to allow or forbid the FTP access to camera. Default: Forbid
[Bandwidth control(bit rate)]
Select the total bit rate for data transmission from the following.
Unlimited/ 64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024 kbps/ 2048kbps/ 4096kbps/ 8192kbps
Default: Unlimited
Note:
•Select "128kbps" or a faster rate to carry out the live transmission of JPEG images and the FTP peri- odic image transmission simultaneously.
•When "Bandwidth control(bit rate)" is set low, taking a picture using the one shot button may not func- tion depending on the use environment. In this case, select "QVGA" for "Image capture size" of "JPEG" on the [JPEG/H.264] tab or set "Image quality" of "JPEG" lower.
45