Panasonic WV-SP102 Error indications relating to Ddns, Error indications relating to login

Page 58

Error indications relating to DDNS

Category

Indication

Description

 

 

 

Connection error

No response from the DDNS

• The designated IP address of the DDNS may

 

server.

be incorrect. Check if the DDNS settings are

 

 

configured correctly.

 

 

• The DDNS server may be down. Ask the net-

 

 

work administrator.

 

 

 

User name or password isn't cor- • Entered user name or password may be incor-

 

rect.

rect. Check if the DDNS settings are configured

 

 

correctly.

 

 

 

 

IP address updated failed.

• IP address update error occurred in the DDNS

 

 

server. Ask the network administrator.

 

 

 

Internal error

Undefined error.

• An error occurred in the DDNS function. Check

 

 

if the DDNS settings are configured correctly.

 

 

 

Error indications relating to NTP

Category

Indication

Description

 

 

 

Connection error

No response from the NTP server.

• The IP address of the server may be incorrect.

 

 

Check if the IP address of the server is config-

 

 

ured correctly.

 

 

• The NTP server may be down. Ask the network

 

 

administrator.

 

 

 

Internal error

Undefined error.

• An error occurred in the NTP function. Check if

 

 

the NTP settings are configured correctly.

 

 

 

Synchronizing with NTP

NTP update succeeded.

• Time correction succeeded.

succeeded.

 

 

 

 

 

Error indications relating to login

Category

Indication

Description

 

 

 

Login

User name or IP address

• The login user name will be displayed when

 

 

"On" is selected for "User auth.".

 

 

• The IP address of the PC currently accessing

 

 

to the unit will be displayed when "On" is

 

 

selected for "Host auth.".

 

 

 

58

Image 58
Contents Model No. WV-SP105, WV-SP102 WV-SP105E, WV-SP102E Operating InstructionsContents Trademarks and registered trademarks PrefaceAbout notations AbbreviationsViewer software Monitor images on a PC Example of IPv4 accessExample of IPv6 access Monitor images from a single cameraRefresh interval of Jpeg images About the Live Brightness buttons*2 Alarm occurrence indication button*2Zoom buttons + brighter button Image will be brighter Camera titleMonitor images from multiple cameras Action at an alarm occurrence Action at an alarm occurrenceAlarm type Notify of alarm occurrences by e-mailTransmit images onto an FTP server About the network security Equipped security functionsDisplay the setup menu from a PC How to display the setup menuHow to operate the setup menu About the setup menu window 0Schedule button 1Maintenance button4Setup 2Help buttonConfigure the basic settings Basic Link indicator orange Default On Link/Access indicatorDefault On Power indicator green Access indicator GreenAspect ratio Configure the settings relating to Jpeg images JPEG/H.264Default 1280x960*1 Refresh interval JpegConfigure the settings relating to H.264 images JPEG/H.264 264 1 · H.264Image capture size Default 30fpsDefault Normal Transmission priorityRefresh interval Default Multicast TTL/HOPLimit*2Available value 1 Default Transmission typeExtra zoom SP105 Image adjustPrivacy zone Adaptive black stretch Default Off Mask areaBack light compensationBLC Simple black & white mode Light control modeDefault OnHigh Auto slow shutter Default Off White balanceDefault High Chroma gain level Default ATW1Default Blue gain Default Pedestal levelSet mask areas + button Reset buttonExtra zoom − buttonArea Default Off Setup buttonDisplay type Example of entry IP addressAvailable number of characters 1 128 characters Configure the settings relating to the alarm action Alarm Configure the alarm settings AlarmAlarm Configure the settings relating to the alarm image Alarm Alarm imageConfigure the VMD settings VMD area Light detection control VMD information additionInformation addition Set the VMD areas VMD area Mail notification Destination of notificationAvailable range 1 Default Retry times Panasonic alarm protocol notificationPanasonic alarm protocol Destination portUser auth Password Retype passwordAccess level Available number of characters 4 32 charactersHost check Default Off IP addressHost auth Activation Default 1280×960*1 VGA*2Priority stream Destination IP addressConfigure the settings relating to the mail server Mail Configure the settings relating to the FTP server FTP Default Time adjustment interval Configure the settings relating to the NTP server NTPTime adjustment Default 1hConfigure the network settings Network Configure the network settings NetworkIPv4 network IPv6 network CommonEasy IP Setup accommodate period Default 20minAccess interval Configure the settings relating to Ddns DdnsDefault Off Host name Available number of characters 1 64 charactersConfigure the settings relating to Snmp Snmp FTP periodic image transmission Default Off Directory nameDefault 1s FTP periodic image transmissionHow to set the schedules How to delete the set schedule Configure the settings relating to the schedules Schedule Check the system log System log Maintenance of the camera MaintenanceError description Time & dateUpgrade the firmware Upgrade Reset to the default and load the default Html files Reset the settings/Reboot the camera Default resetReboot Viewing Help Displaying the Help screenAbout the displayed system log Category Indication DescriptionError indications relating to Ddns Error indications relating to loginCannot access from the web TroubleshootingBrowser No image is displayed Image is not being refreshed Alarm occurrence indicationNo indicator lights No image is displayed or tooWhen displaying H.264 images Pop-up blocked. To see this Following message is disPlayed on the information bar Pop-up or additional optionsPanasonic Canada Inc