Panasonic WV-SP102E, WV-SP105E operating instructions Set mask areas

Page 27

Set mask areas

When "Off" is selected for "Back light compensation(BLC)" (page 24), it is possible to compensate for backlight by masking brighter areas.

Step 1

Display the "Image adjust" setup menu. Page 24)

Step 2

Click the [Start] button of "Mask area".

Borders will appear and the image displayed on the [Image/Privacy] tab will be divided.

It will be divided into 48 (6x8)

 

SP105

It will be divided into 16 (4x4)

 

SP102

Note:

When the aspect ratio is "4:3", areas can be masked. If the aspect ratio is changed to "16:9" after completion of area masking, the setting of area masking is maintained.

Step 3

Click the divided areas to be masked.

The clicked areas will be masked and will become white. To cancel masking, click the area again.

Step 4

Click the [End] button after completing masking areas.

The borders on the image displayed on the [Image/ Privacy] tab will disappear.

Note:

When the [Reset] button is clicked, masking for all the masked areas will be canceled.

27

Image 27
Contents Operating Instructions Model No. WV-SP105, WV-SP102 WV-SP105E, WV-SP102EContents Abbreviations PrefaceAbout notations Trademarks and registered trademarksViewer software Monitor images from a single camera Example of IPv4 accessExample of IPv6 access Monitor images on a PCRefresh interval of Jpeg images About the Live + brighter button Image will be brighter Camera title Alarm occurrence indication button*2Zoom buttons Brightness buttons*2Monitor images from multiple cameras Notify of alarm occurrences by e-mail Action at an alarm occurrenceAlarm type Action at an alarm occurrenceTransmit images onto an FTP server Equipped security functions About the network securityHow to display the setup menu Display the setup menu from a PCHow to operate the setup menu About the setup menu window 2Help button 1Maintenance button4Setup 0Schedule buttonConfigure the basic settings Basic Access indicator Green Default On Link/Access indicatorDefault On Power indicator green Link indicator orangeRefresh interval Jpeg Configure the settings relating to Jpeg images JPEG/H.264Default 1280x960*1 Aspect ratio264 1 · H.264 Configure the settings relating to H.264 images JPEG/H.264Transmission priority Default 30fpsDefault Normal Image capture sizeTransmission type Default Multicast TTL/HOPLimit*2Available value 1 Default Refresh intervalImage adjust Extra zoom SP105Privacy zone Default Off Mask area Adaptive black stretchBack light compensationBLC Default Off White balance Light control modeDefault OnHigh Auto slow shutter Simple black & white modeDefault Pedestal level Default ATW1Default Blue gain Default High Chroma gain levelSet mask areas − button Reset buttonExtra zoom + buttonDefault Off Setup button AreaDisplay type IP address Example of entryAvailable number of characters 1 128 characters Configure the alarm settings Alarm Configure the settings relating to the alarm action AlarmAlarm Alarm image Configure the settings relating to the alarm image AlarmConfigure the VMD settings VMD area VMD information addition Light detection controlInformation addition Set the VMD areas VMD area Destination of notification Mail notificationDestination port Panasonic alarm protocol notificationPanasonic alarm protocol Available range 1 Default Retry timesAvailable number of characters 4 32 characters Password Retype passwordAccess level User authDefault Off IP address Host checkHost auth Destination IP address Default 1280×960*1 VGA*2Priority stream ActivationConfigure the settings relating to the mail server Mail Configure the settings relating to the FTP server FTP Default 1h Configure the settings relating to the NTP server NTPTime adjustment Default Time adjustment intervalConfigure the network settings Network Configure the network settings NetworkIPv4 network Common IPv6 networkDefault 20min Easy IP Setup accommodate periodAvailable number of characters 1 64 characters Configure the settings relating to Ddns DdnsDefault Off Host name Access intervalConfigure the settings relating to Snmp Snmp FTP periodic image transmission Default Off Directory nameDefault 1s FTP periodic image transmissionHow to set the schedules How to delete the set schedule Configure the settings relating to the schedules Schedule Time & date Maintenance of the camera MaintenanceError description Check the system log System logUpgrade the firmware Upgrade Reset the settings/Reboot the camera Default reset Reset to the default and load the default Html filesReboot Displaying the Help screen Viewing HelpCategory Indication Description About the displayed system logError indications relating to login Error indications relating to DdnsTroubleshooting Cannot access from the webBrowser No image is displayed No image is displayed or too Alarm occurrence indicationNo indicator lights Image is not being refreshedWhen displaying H.264 images Pop-up or additional options Following message is disPlayed on the information bar Pop-up blocked. To see thisPanasonic Canada Inc