Configure the settings relating to the schedules [Schedule]
On the "Schedule" page, it is possible to configure the settings relating to schedules as follows.
•VMD permission (Video motion detection will be active only in the specified schedule.)
•Access permission (Access to the camera will be allowed only in the specified schedule.)
The "Schedule" page has only the [Schedule] tab. Up to 5 schedules can be set.
Step 1
Select an action to be assigned to the schedule from "Schedule mode".
"Off" is selected at the default.
Off: No action will be taken for the respective schedule.
VMD permission: The video motion detection (VMD)
function will be active during the period of the schedule.
Access permission: Users whose access level is set to 2 and 3 on the [User authentication] tab (☞ page 38) can access the camera only in the period of sched- ule.
Note:
•Select "On" for "User auth." on the [User auth.] tab of "User mng." page (☞ page 38) and "Off" for
"Host auth." on the "Host auth." page (☞ page 39) to validate "Access permission".
Step 2
Select days of a week by checking the respective checkboxes.
Step 3
Click [C] to select the start time and the end time of the schedule.
When not designating time, check the checkbox of "24h".
Step 4
Click the [Set] button after completing the settings.
→The result will be displayed at the bottom of the window.
Note:
•The schedules displayed at the bottom of the win- dow can be identified by colors assigned to each schedule.
52