Panasonic WV-SP102E Following message is dis, Played on the information bar, Pop-up window

Depending on the OS installed on the PC, the following may occur. Follow the instructions below when the follow- ing has occurred. By performing the following solutions, other applications and the security level may not be affected.

The "Information Bar" expressed in the following symptom and solutions will be displayed just below the address bar only when there is information to communicate.

	Information Bar
Symptom	Cause/solution	Reference
		pages
The following message is dis-	• Click the information bar and select "Always Allow Pop-
played on the information bar.	ups from This Site…". The dialog window saying "Allow
"Pop-up blocked. To see this	pop-ups from this site?" will be displayed. Click the [Yes]	−
pop-up or additional options,	button.
click here…"
The following message is	• Click the information bar and select "Install Active X
displayed on the information bar.	Control". The "Security Warning" window will be displayed.
"This site might require the	Click the "Install" button on the displayed "Security
following Active X control	Warning" window.	−
'nwcv4Ssetup.exe' from
'Panasonic System Networks
Co.,Ltd.'. Click here to install..."
	• Click "Internet Options…" under "Tools" of the menu bar of
	Internet Explorer, and then click the [Security] tab. Click
	"Internet" in the "Select a Web content zone to specify its
An unnecessary status bar or	security settings:" section. Then, click the [Custom
scroll bar is displayed on the	Level…] button to open the "Security Setting" window.	−
pop-up window.	Under "Miscellaneous", select "Enable" for "Allow script-
	initiated windows without size or position constraints".
	Click the [OK] button. When the warning window is dis-
	played, click the [Yes] button.
	• When "120 DPI" is not selected for "DPI setting", they may
	not be displayed correctly. Click the "Settings" tab on the
Images are not fit in the frames.	"Properties" window of "Screen" (in the control panel), and	−
	then click the [Advanced] button. Change the "DPI setting"
	to "Large size (120 DPI)".

63