Panasonic WV-SP105E, WV-SP102E Panasonic alarm protocol notification, Destination port

Configure the settings relating to Panasonic alarm protocol [Notification]

Click the [Notification] tab on the "Alarm" page. (☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to Panasonic alarm protocol can be configured in this section.

■Panasonic alarm protocol notification

[Panasonic alarm protocol]

Select "On" or "Off" to determine whether or not to pro- vide notification by e-mail according to the settings for the "Alarm" checkboxes of "Destination of notification" below.

•When an alarm is detected ("Alarm")

Default: Off

Note:

•When "On" is selected, notification of the alarm occurrence will be provided to the registered desti- nation addresses in order (to IP address 1 first, to IP address 8 last).

[Destination port]

Select a destination port for the Panasonic alarm proto- col from the following.

Refer to the help window to infomation about the unavailable port number.

Available range: 1 - 65535

Default: 1818

[Retry times]

Select a retry time for the Panasonic alarm protocol. Available range: 0-30

Default: 2

■Destination of notification

[Address 1] to [Address 8]

Enter the destination IP address of the Panasonic alarm protocol from the following. Host name is unavailable for the IP address. Up to 8 destination addresses can be registered.

"Alarm" checkbox: When the checkbox is checked, the Panasonic alarm notification will be provided upon an alarm occurrence.

"Destination IP address" checkbox: Enter the desti- nation address.

To delete the registered IP address, click the [Delete] button respective to the desired IP address.

Important:

•Confirm that the destination IP addresses are regis- tered correctly. When a registered destination does not exist, notification may be delayed.

37