
Configure the settings of the servers [Server]
The settings relating to the mail server, the FTP server and the NTP server can be configured on this page. The "Server" page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab.
Configure the settings relating to the mail server [Mail]
Click the [Mail] tab on the "Server" page. (☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to the mail server used to send the alarm mail can be configured on this page.
Important:
•When a terminal that receives
[SMTP server address]
Enter the IP address or the host name of the SMTP server used to send
Available number of characters: 1 - 128 characters
[SMTP port]
Enter the port number to which
Available port number: 1 - 65535
Default: 25
[POP server address]
When "POP before SMTP" is selected for "Type", enter the IP address or the host name of the POP server. Available number of characters: 1 - 128 characters
Important:
•When entering the host name for "SMTP server address" or "POP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network" page. (☞ Page 45)
[Type]
Select the authentication method to send
None: It is not necessary to clear any authentication to send
POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server to send
SMTP: It is necessary to clear the SMTP server authen- tication to send
Default: None
Note:
•When you don't know the authentication method to send
[User name]
Enter the user name to access the server. Available number of characters: 0 - 32 characters
[Password]
Enter the password to access the server.
Available number of characters: 0 - 32 characters
[Sender's mail address]
Enter the mail address of a sender.
The entered mail address will be displayed in the "From" (sender) line of the sent mails.
Available number of characters: 3 - 128 characters
41