Panasonic CQ-R221U manual Power and Sound Controls, Volume, Mute

E N G L I S H

1

Power and Sound Controls

S•HDB

Power

Turn the key in the ignition until the accessory indicator lights.

Press [PWR] to switch on the power.

Notes:

●When a cassette is inserted with all power connected, the unit power will automatically turn on and tape loading begins and plays.

●When power is turned off while the time is displayed, the clock mode remains on. When the [PWR] is pressed again, the system is completely off.

Before you leave your car that has no ACC, be sure to switch power off.

Volume

●Press [VOL j] or [VOL i] to increase or decrease volume.

Volume Level

S•HDB

0 to 39

●Press [VOL j] or [VOL i] for more than 0.5 second to

change numeric levels on the display rapidly.

DB

S•H

Mute

●Press [MUTE] to decrease Volume level.

●“MUTE” blinks while this operation.

●Press [MUTE] again to cancel.

Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume level adjuster so that you will not be deafened with sudden loud volume.

This system operates as follows. When [PWR] is switched on, the volume level is low. After that, the volume level gradually returns to the level as the same as the one before turning off. Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.

10

CQ-R221U