Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
FM1 | FM2 | FM3 | AM |
6 stations | 6 stations | 6 stations | 6 stations |
|
|
|
|
Caution: For safety reasons, do not attempt to program while driving.
S•HDB
d
Manual Station Preset
Press [BAND] to select a desired band.
Use manual or seek tuning to find a station that you want to program into memory.
Press and hold one of the station selector buttons 1 through 6 until the display blinks. The memory is now set for that button on the band you have selected.
Repeat the process to set other stations for the FM1 to AM bands.
S•HDB
d
Press and hold
S•HDB
d
Press and hold
Preset Number
Note: You can change the memory setting by repeating the above procedure.
Auto Preset Memory
Select a band, and press and hold [BAND] (APM) for more than 2 seconds.
●The 6 strongest available stations will be automatically set in memory on preset buttons 1 through 6.
●Once set, the preset stations are sequentially scanned for 5 seconds.
●Press the appropriate preset button for the station you want to hear.
Note: The stations manually preset on the selected band will be deleted.
Tuning in a Preset Station
Press any of the buttons [1] through [6] to tune in the station preset by the above steps to .
To reduce interference during FM broadcasts (MONO)
Press [MONO] for monaural reception in case a lot of interference is present in an FM stereo signal or to improve the listening quality of weak FM broadcasts. To turn it off, press [MONO] again.
E N G L I S H
4
13