Panasonic CQ-R221U manual Blank Skip, Repeat Play, Metal Tape Mode, Dolby Noise Reduction

B

S•HD

Blank Skip

Press [5] (SKP) to skip long unrecorded portions on the tape.

This is most convenient if you quickly want to skip the remaining unrecorded portions at the end of the tape and fast forward to the beginning of the first music on the reverse side of the tape.

To turn it off, press [5] (SKP) again.

Notes:

●“B·SKIP” indicator lights. However, the blank skip operation will not work if REPEAT is on. The repeat function has priority over that of the blank skip function.

●Also the blank skip operation will not work when the unrecorded portion of the tape is less than 15 seconds.

Repeat Play

Press [4] (REP) to repeat the same music you are now listening to.

After finishing the music just listened to, the rewind starts automatically until the beginning of music, and the same music starts playing again.

To turn it off, press [4] (REP) again.

Metal Tape Mode

Press [1] (MTL) when playing metal or chromium dioxide (CrO2) tapes.

To turn it off, press [1] (MTL) again.

E N G L I S H

6

DB

S•H

Note: Playing non-metal tapes in metal tape mode mode causes high frequency imbalance, which affects tone quality.

Dolby Noise Reduction

Press [2] (NR) to set the Dolby B NR mode.

To cancel the Dolby NR mode, press [2] (NR) again.

Note:

Set the Dolby B NR mode when playing back a tape recorded with Dolby B Noise Reduction.

15

CQ-R221U