Panasonic CQ-R221U manual To install the Removable Face Plate

Remove the removable face plate by pulling on the right side of the unit. Place the removable face plate in a supplied case.

Contacts

Main Unit

Fig. 6

Security Indicator

S•HDB

As shown in Fig. 7, insert the removable face plate with the arrow pointing toward the

removable face plate case until you hear a

“click”. Keep the removable face plate in theRemovale Face Plate Case case. Then, you can bring the plate safely.

Set two arrows together. Fig. 7

E

N

G

L

I

S

H

18

To install the Removable Face Plate

Slide the left side of the removable face plate in place.

Press the right end of removable face plate until “click” is heard.

Plastic Tab

S•HDB

Cutout

Removable

Face Plate

Fig. 8

S•HDB

Fig. 9

Cautions:

1.Before removing the removable face plate, make sure the power is off.

2.This removable face plate is not water-proof. Do not expose it to water or excessive moisture.

3.Do not remove the removable face plate while driving your car.

4.Do not place the removable face plate on the dashboard or nearby areas where the temperature rises to high levels.

5.Do not touch the contacts on the removable face plate or on the main unit, since this may result in poor electrical contacts.

6.If dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth.

27

CQ-R221U