When the display is blank, the battery is empty and A300 has gone to sleep mode. Charge your A300. If the battery is totally drained, it may take a while for the charging animation to appear on the display.
CHANGING HEART RATE SENSOR BATTERY
To change the battery of the heart rate sensor yourself, carefully follow the instructions below:
When changing the battery, make sure the sealing ring is not damaged, in which case you should replace it with a new one. You can purchase the sealing ring/battery kits at
When handling a new, fully charged battery, avoid
1.Using a coin, open the battery cover by turning it coun- terclockwise to OPEN.
2.Insert the battery (CR 2025) inside the cover with the positive
(+) side against the cover. Make sure the sealing ring is in the groove to ensure water res- istance.
3.Press the cover back into the con- nector.
4.Use the coin to turn the cover clockwise to CLOSE.
Danger of explosion if the battery is replaced with wrong type.
PRECAUTIONS
The Polar A300 is designed to measure heart rate and tell your activity. No other use is intended or implied.
61