19.While a second person holds the Console (33) near the Handlebar (10), connect the wires on the Console to the Upright Wire (60), to the Receiver Extension Wire (143), and to the Pulse Wire (135).
Insert the excess wire into the Handlebar (10) or into the Console (33).
Tip: Avoid pinching the wires. Attach the Console (33) to the Handlebar (10) with four M4 x 16mm Screws (93).
20.Attach the Console Cover (11) to the Handlebar (10) with two M4 x 16mm Screws (93).
19
33
Avoid pinching
the wires
143 135 |
10 |
60 |
93 |
20 |
10 |
93 |
11 |
21.Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be included. Place a mat under the elliptical to protect the floor or carpet.
15