EN
Usage 3. Changing and revising settings
1.While displayed
2.Use a pointed implement to press the Set button on the side of
the instrument for approximately 2 seconds.
3.The hour number on the display flashes. Start from setting the time.
Usage 4. Changing the display
The display changes each time the Mode button is pressed.
Notice
• The display does not change until the Mode button is released.
• Continued pressing of the Mode button (approximately 3 seconds) resets the display.
Usage 5. Display content reset
The display content can be reset to zero by a long press of the Mode button.
1. While displayed
2. Press the Mode button for at least 3 seconds.
3. The values for steps, calorie consumption, distance and walking time are zeroed.
These values cannot be restored once they have been reset.
7