Dynacord CMS 1000, 1600, 2200 owner manual Mute, Signal/Peak

Page 12

INPUT STEREO

23. MUTE

The MUTE button mutes the input signal post fader, including all AUX sends. PFL and Signal/Peak stay operational.

24. PFL

Engaging the PFL button sums the stereophonic audio signal of the corresponding input channel and routes the resulting monaural signal to the headphones bus. You are able to listen to the audio signal via the phones output. The meter instrument in the master section is simultaneously switched, so that the left LED-chain indicates the level (in dBu) of the actually chosen channel, which allows optimally matching the level of the signal source.

Simultaneously assigning as many channels as you want to the phones summing bus is no problem. The volume levels of the individual signals are not affected by the setting of the corresponding channel faders (PRE FADER LISTEN), which provides the opportunity to set the level and the EQ of a channel, without the need to include it in the main mix, i.e. you can leave the channel fader down or even engage the MUTE button.

25. SIGNAL/PEAK

The stereo SIGNAL/PEAK indicator function provides independent analysis of left and right channel audio signals. The respective highest level reading is indicated, assuring that neither one is already driven into clipping. For further information on how to use this indicator most efficiently, please refer to the description of the monaural channel’s identical feature.

26. VOLUME

The channel fader is used to simultaneously adjust both levels (volumes) of the stereo signal. Functioning is totally similar to the monaural channel fader, as previously described in the paragraph INPUT/MONO.

12

Image 12
Contents CMS 1000/1600/2200 Contents InhaltsverzeichnisTable DES Matières Important Safety Instructions Unpacking and Warranty Installation and ConnectionsDescriptions Input Mono MICLine Setting Instructions InsertGain LO CUT 80 Hz Voicing FilterEQ Section AUX / FX 1/2 AUX 3/4Signal / Peak Indicator VolumePAN MuteInput Stereo 15.MICStereo Input L/MONO R Gain MICLine Trim EQ SectionAUX / FX 1/2 AUX3/4 BAL SIGNAL/PEAK Effects 1/2 FX1/FX2Changing FX Start Programs 27/28. AUX1/2 SendDisplay 30. UP/DOWNPeak LED Effect ReturnAUX3&4 / Master AUX3/4 OUTAUX3/4 Inserts AUX3/4 PostAUX3/4 Volume Power AnzeigeBand Equalizer Master Master LED-DISPLAYStandby PFL MasterMono Output Mono OUT Level & PRE/POSTPhones Level Record Send L/RFootswitch Master OUTMaster Inserts Lamp XLRPower Rear PanelCabling CablingLF-Cables Balanced or Unbalanced? UnbalancedSetting UP a STANDARD-PA System Sound CheckMain Mix Monitor MixSetup Examples Optional Subwoofer MonitoringSetup Examples Setup Examples Wichtige Sicherheitshinweise Beschreibung Auspacken und GarantieLine Gain Klangregelung Einstellhinweis Signal / PEAK- Anzeige Input Stereo +20 +15 +10 100 200 500 10k 20k AUX / FX Effekt 1/2 Umstellung der Effekt-StartprogrammeEinstellhinweise Effekt ReturnAUX3/4 +20 +15 +10 100 200 500 10k Master LED-DISPLAY Mono OUT Level PhonesMaster OUT Rückseite Aufbau Einer STANDARD-PA VerkabelungAufbau SoundcheckHauptmix MonitormixAufbau Beispiele Aufbaubeispiele Aufbaubeispiele Instructions DE Sécurité Importantes Installation et Branchements Déballage et garantieEntrée Mono Line LigneInsert Insertion Conseils de réglageLO CUT 80 Hz Filtre coupe-bas Voicing Filter Filtre de VoixEQ Section Égaliseur Instructions de réglage AUX/FX 1/2 Auxiliaires/EffetsIndicateur SIGNAL/PEAK Entrée Stéréo Section EQ AUX/FX 1/221.AUX3/4 BAL anceSIGNAL/PEAK Effets 1/2 Changer les effets de démarrageAfficheur 31/32. FX1/2 à AUX3/4Temoin Peak Effect Return Retour D’EFFETAUX3&4 / Master 45. Témoin Power 44. Égaliseur 7 Bandes46. Échelle DE LED Master Master L+REQ to Affectation de l‘EQ Mono OUT Niveau Mono OUT ET PRE/POSTPhones Sortie casques Track Return L/R Retour 2 PistesMaster OUT Sortie générale Master Inserts Insertions principalesPanneau Arrière Cablage CâblageCâbles basse fréquence Symétrisés ou non symétrisés ? Installation D‘UN Système DE Sonorisation Mixage principal Mixage des retours MonitorExemples D‘INSTALLATION Exemples D‘INSTALLATION Exemples D‘INSTALLATION Specifications Block Diagram Dimensions / Abmessungen Effect presets Effekt Presets Programmes Effets
Related manuals
Manual 32 pages 46.96 Kb