METHODS OF BURNER IGNITION
There are two ways to ignite the burner. The first is by using the ignition system built into your grill. The second is with a match.
Next are the steps for igniting your grill using the ignition system. On the following page are steps for igniting your grill with a match.
Summary lighting instructions are posted on the cart leg under the burner control knobs.
BURNER IGNITION & USAGE
BURNER IGNITION
Electronic Ignition System
The electronic ignition system ignites the burner with a spark from the igniter electrode inside the Gas Catcher™ ignition chamber. You generate the energy for the spark by pushing the igniter button. You will hear the igniter clicking.
A) Open the grill lid (1).
mDANGER
Failure to open the lid before igniting the grill’s burners, or not waiting five minutes to allow the gas to clear if the grill does not light, may result in an explosive
B)Make sure ALL burner control knobs are turned
off (2). Check by pushing burner control knobs in and turning them clockwise until they stop.
C)Turn the gas supply valve on (3).
D)Light the outside burner by pushing the large burner control knob in and turning it counterclockwise to start/high ( ) position (4).
E)Push and hold in the igniter button (5). You will hear the igniter clicking.
F)Check that the burner is lit by looking through the cooking grates. You should see a flame.
mWARNING: While igniting the grill or cooking, never lean over open grill.
mWARNING: If the burner fails to ignite within five seconds, stop, turn the burner control knob to off and wait five minutes to allow the gas to clear before you try again or light with a match.
G)After the outside burner is lit, you can turn on the inside burner. Push in the small burner control knob and turn it to start/high ( ) position (6). The inside burner will then be ignited by the outside burner.
TO EXTINGUISH BURNER
Push each burner control knob in and turn it clockwise to the off ( ) position. Turn gas supply off at the source.
Some batteries have a plastic protective wrap around them. This plastic must be removed before you attempt to ignite your grill. Do not confuse this plastic with the battery label.
WWW.WEBER.COM® 25