BURNER TUBE CLEANING
OR REPLACEMENT
Confirm that Grill is Off and Cool
A)Turn gas supply off at source and disconnect LP cylinder.
B)Check that all burner control knobs are in the off
(
) position. Check by pushing burner control knobs in and turning them clockwise until they stop. If they do not turn, they are already off. If they do turn, continue turning them clockwise until they stop; then they are off.
C)Open lid and remove cookbox components.
Remove Burner Tubes
You will need: A 3/8" nut driver.
A)Remove the screw that holds the outside burner tube to the cookbox (1).
B)Rotate the outside burner tube 90°. Slide and lift burner tube away from valve orifice and remove from cookbox. (2)
C)Repeat this procedure for the inside burner tube (3).
mCAUTION: Care must be taken when removing or reinstalling burner tubes. Do not force or bend the gas lines that connect the control valves to the burner tubes (4).
ANNUAL MAINTENANCE
1 | 3 |
2
4
WWW.WEBER.COM® 31