Weber 57515 manual Connecting to the GAS Supply, Connecting the Flexible Hose to GAS Supply

CONNECTING TO THE GAS SUPPLY

ALMOST READY TO GRILL

A quick-disconnect device connects your grill to the gas supply. After you have made the connection, a leak check will need to be performed.

CONNECTING THE FLEXIBLE HOSE TO

GAS SUPPLY

A) Remove screw from right leg of cart. Insert hose retention clip. Reinstall screw (1).

m WARNING: The hose must be secured to the cart leg by the hose retention clip. Failure to do so could cause

damage to hose resulting in a fire or 1 explosion, which can cause serious

bodily injury or death and damage to property.

B)Slide the collar of the quick-disconnect back (2).

C)Push male fitting of the hose into the quick-disconnect and maintain pressure. Slide the collar closed (3). If it does not engage or lock, repeat procedure.

This procedure will produce a gas joint. Gas will not flow unless the quick-disconnect is properly engaged. To disconnect the hose, push collar back and pull out the plug. (This automatically shuts off gas.)

The natural gas hose was attached during the manufacturing process. We recommend that the hose-to-gas manifold connection be leak tested, following guidelines in this Owner’s Guide, prior to grill operation.

Note: Do not turn on gas source until you have performed a leak check. Refer to“CHECKING FOR GAS LEAKS.”

2

3

NATURAL GAS HOSE CONNECTION

1 2 3 4 5 6

1	Shutoff valve	4	Dust covers
2	Pipe nipple	5	Male connection
3	Socket	6	Swivel connection

22WWW.WEBER.COM®