Weber 56069 manual Connecting GAS Supply, Connect GAS Supply

12 CONNECTING GAS SUPPLY

DANGER

Use of any hose and regulator assembly other than that provided or recommended by Weber-Stephen Products Inc. could be dangerous, and may not provide adequate gas supply to the Summit® Built-In gas grill, and could result in a fire or an explosion causing serious bodily injury or death, and damage to property.

DANGER

Failure to build a remote LP cylinder enclosure for a single 20 lb cylinder only, following the requirements for ventilation, cylinder retention and separation of the LP cylinder from a heat source, listed in the ANSI Standard for Outdoor Cooking Gas Appliances, ANSI Z21.58 CSA 1.6, could be dangerous, and could result in a fire or an explosion causing serious bodily injury or death and damage to property.

If you do not follow the DANGER statements exactly, the Warranty on the Summit® Built-In gas grill will be voided.

	SIDE BURNER LP SUPPLY CONNECTIONS
1		Corrugated Gas Line to Manifold
2		Plug unused hole with supplied plug
3		Use bushing for gas line hole
4
		1/2" (12.7mm) Flared Gasket
5		90° Fitting
6
		Cap (Optional Side Burner)
7
		To Side Burner
8
		Connection to LP Tank

aTop of Box

bBack of Box

cSide View

CONNECT GAS SUPPLY

1)Uncap the flare fitting from the optional side burner connection located inside the Summit® Built-In Tank Cabinet (#21280).

2)Connect the corrugated gas line to the side burner Connection.

a

1

4 5

2 3

b

6

c

a

5

2

b 8

7

c

WWW.WEBER.COM®