3-5 Display Symbols and Key Operation
Key operation
Key operation affects how the balance functions. The basic key operations are:
“Press and release the key immediately” or “Press the key” = normal key operation during measurement
“Press and hold the key”
Display symbols
Each key, when pressed or when pressed and held, functions as follows:
Key | When pressed | When pressed and held |
|
|
|
Turns the display on or off. The standby indicator is displayed when the display is turned off. The weighing mode is enabled when the display is turned on.
This key is available anytime. Pressing the key during operation will interrupt the operation and turn the display off.
|
| In the weighing mode, turns the minimum | Enters the function table mode. | |
|
| weighing value on or off. | Refer to | “9. FUNCTION TABLE”. |
|
| In the counting or percent mode, enters |
|
|
|
| the sample storing mode. |
|
|
|
|
|
| |
|
| Switches the weighing units stored in the | Enters the response adjustment mode. | |
|
| function table. |
|
|
|
| Refer to “4. WEIGHING UNITS”. |
|
|
|
|
|
| |
|
| Cancels the operation when performing | Enters the calibration mode. | |
|
| settings. |
|
|
|
|
|
| |
|
| Outputs the weight data to a printer or | No function at the factory setting | |
|
| personal computer using the | By changing the function table: | |
|
| serial interface, depending on the | ||
|
| Outputs | “Title block” and “End block” for | |
|
| function table settings. | ||
|
| GLP report. | ||
|
|
| ||
|
| Confirms the operation when performing |
|
|
|
| settings. |
|
|
|
|
|
|
|
|
| Sets the display to zero. |
|
|
|
|
|
| |
8