A&D FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i Selecting the statistical items to output

Page 19

Selecting the statistical items to output

5 Press the SAMPLE key to display 5taf 0

.

6 Press the RE-ZERO key to select the output items.

In the example, 5taf 1 is selected to output the number of data, sum, maximum, minimum, range (maximum-minimum) and average.

	Parameter			Description
			0	Number of data, sum


	1			Number of data, sum
	1			Maximum, minimum, range (maximum – minimum), average
				Maximum, minimum, range (maximum – minimum), average
				Number of data, sum
	2			Maximum, minimum, range (maximum – minimum), average,
				Standard deviation, coefficient of variation

7 Press the PRINT key to store the setting.

Note

The statistical calculation mode will be enabled using the

ON:OFF key or when the power is turned on.

8 Press the CAL key to return to the weighing mode.

Selecting the unit

9 Press the MODE key to select the unit to be used for the statistical calculation mode.

Notes

Selecting the unit using the MODE key is not available after the data is entered. In this case, clear the data as described on page 19 and select the unit using the MODE key.

When the statistical calculation mode is to be enabled upon power-on, select the unit in “Unit (Unit)” of the function table beforehand.

5-4-2 Using The Statistical Calculation Mode Entering data for statistical calculation

Use the following keys to operate the statistical calculation mode.

	MODE		key				...............			When the data is entered, moves between the displaying items (weighing mode,
							...............

											statistical results and data operation) each time the key is pressed.
										When no data has been entered, selects the unit.



	SAMPLE				key				Turns the minimum display on or off, in the weighing mode.
								...........
	RE-ZERO					key		...........	Sets the display to zero in the weighing mode.
	RE-ZERO					key			Sets the display to zero in the weighing mode.
							................
	PRINT		key								Outputs the data number and the weight data and includes the weight data to


											statistical calculation in the weighing mode. (Output is not in the data format
											specified in the function table because of the data number added.)
											Outputs the statistical results while the statistical results are displayed. (Output


											is not in the data format specified in the function table.)
				....................
	CAL	key		....................					Returns to the weighing mode.
	CAL	key							Returns to the weighing mode.

17

Image 19

Contents WM+PD4001199 RI SPage Contents External Dimens Ions MaintenanceRS-232C Serial Interface Connection to Peripheral EquipmentCompliance FeaturesIntroduction About This ManualUnpacking Unpacking the BalanceInstalling the Balance Before Use PrecautionsDuring Use After Use Power SupplyFunction Table Display Symbols and Key OperationDisplay symbols Key operationUnits Weighing UnitsCapacity Sample Storing UnitsRE-ZERO Weighing Basic Operation Gram ModeSelecting the counting mode Counting Mode PCSStoring a sample unit mass Counting operation Counting mode using the Acai functionReading the percentage Percent Mode %Selecting the percent mode Storing the 100% reference massGetting Started Statistical Calculation ModePrint Selecting the statistical items to outputSelecting the unit ModeOutputting the statistical results Clearing the statistical data Deleting the latest dataChanging the function table Statistical Calculation Mode Example of UseEnabling the statistical calculation mode Returning to the weighing modeUsing The Statistical Calculation Mode MID Slow Response AdjustmentOperation FastDisplay Calibration ModeCalibration TermsCAL Calibration Using an External WeightEnd Calibration Test Using an External Weight Glp1 Switches Operation Function Switch and InitializationPermit or Inhibit Initializing the Balance Example Function TableStructure and Sequence of the Function Table Display and KeysDetails of the Function Table Data output Data output modeAuto print polarity Auto print differenceFactory settings TimeoutAK, Error code Mode output itemsCond Hold function Hold Animal weighing modeDescription of the Class Environment, Display Condition CondDecimal point pnt Zero tracking trcTrc Display refresh rate 5pdDescription of the Item Data Output Mode DP Dump print format 5if type Interval output modeDescription of the Item Data Format Standard formatCSV format 5if type KF format 5if typeMT format NU numerical formatData Format Examples Statistical calculation mode apf Capacity indicator apfDescription of the Item Application Function Comparator Function Setting exampleDisplay character set Setting the ID NumberID Number and GLP Report GLP ReportCalibration test report using an external weight Calibration report using an external weightTitle block and end block Underhook PROGRAMMABLE-UNIT Sub 9-pin assignments RS-232C Serial InterfaceConnection to the AD-8121B Printer Connection to Peripheral EquipmentOFF RsKey Using Windows Communication Tools WinCTConnection to a Computer RsComUsing the WinCT software, the balance can do the following Commands to control the balance CommandsCommand List Commands to query weight dataAcknowledge Code and Error Codes Settings Related to RS-232C Maintenance Checking the Balance Performance and Environment TroubleshootingChecking that the balance performs properly Error Codes Asking For Repair Options Page FX-300i SpecificationsFX-120i / 200i External DimensionsFX-1200i / 2000i GLP TERMS/INDEXCondition Counting mode Index Keys and symbols ON/OFF key Sample keyStabilization indicator Capacity indicatorGLP output 23, 25, 26, 32 NET indicatorDigit 31, 35 FXi-02 FXi-08 FXi-09 FXi-10 FXi-11Printer Stability band width Stop bit Stream modeParity Pcs PermitMemo Memo Memo Page Korea Limited German Scales Office