Lucent Technologies 8411 manual Using the Softkeys to Activate a Feature

Page 22

Using the Softkeys to Activate a Feature

Your display and softkeys allow you to access up to 12 switch-related features. For example, you may want to use the Priority Calling feature to call another extension with a distinctive 3-burst ring. You can activate this feature with the softkeys in the following way:

	To access a feature with the 1	Press		Menu
	softkeys (Priority Calling is	• The display shows the initial feature option screen:
	used in this example)	• The display shows the initial feature option screen:
	used in this example)

		LWC		CnLWC AutCB Timer
	2
		Press
		Press		Next
		• The display shows:

CFrwd CPark TmDay PCall

3To use the Priority Calling feature, press the softkey below PCall and then dial the extension.

Note: When the feature is activated, after the display screen shows you the digits you are dialing, an arrow appears above the feature, as in the example below. If there is not an arrow above the feature, the feature is off.

CFrwd CPark TmDay PCall

When both parties hang up from the call, the arrow above PCall (showing feature status indication) disappears.

19

Image 22

Contents Voice Terminal User’s Guide Contents Page Your 8411 Voice Terminal Top View of the 8411D Voice Terminal With DisplayThese four buttons are labeled Has raised bars for Volume control button Telephone number card Handset Bottom View of the 8411 Voice Terminal Rear View of the 8411 Voice Terminal PassageWay Connection Connection with Analog EquipmentPassageWay Green Light Red Light Status Sharing the 8411 Telephone Line with the Analog Adjunct Which has control Red light Telephone line?Quick Look at the Features Voice FeaturesPage Hold Display Features and Features Used with the Softkeys Normal See ExitHow to Use the Features General InstructionsTroubleshooting Later in This Guide Conventions Used in The Following ProceduresQuick Reference Lists at the Back of This Guide Using the Display, Softkeys and Display Control Buttons Display, Softkeys, and Display Control ButtonsThree Default Feature Option Screens Other Softkey Features That May Be On Your Display Abbreviation FeatureUsing the Softkeys to Activate a Feature Voice Feature Procedures Abbreviated Dialing ADTo program/reprogram To end programming Automatic Callback Bridging/Manual Exclusion Call Coverage/Consult Call Forwarding All Calls Call Park Call Pickup ConferenceHandset Volume DiagnosticsDrop Hold Intercom Automatic/DialWhile off Last Number Dialed Leave Word Calling LWCMessage Mute Priority CallingSelect Ring and Ringer Volume Ringer L H Send All Calls Speaker Speakerphone There are eight possible volume settings. On the display Test/Diagnostics TransferTo send present call to another Press Display Feature Procedures Call InformationDirectory Last name, comma use * , first name or initialExit Normal InspectMessage Retrieval Normal ExitStored Number Timer Time/DateRinging Tones Tones and Their MeaningFeedback Tones Troubleshooting Problem SolutionFeature System 75 Version Changes in Feature Operation System 75 Version NotesAccess code See feature access code Key Words to KnowPage Page Quick Reference Lists Miscellaneous

Related manuals

Manual 31 pages 1.6 Kb