Lucent Technologies 8411 manual Send All Calls

Page 40

Send All Calls

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, SAC, appears on the second line of one of the feature option screens.

To send all calls (except priority calls) immediately to coverage (If your system manager has provided a coverage path for your extension)

1If you are using an 8411 with a display, press Menu and then press the softkey below SAC

(while on-hook)

If your 8411 does not have a display or if SAC is not available on your display, press Send Calls

(while on-hook)

or Dial Send All Calls access code __________

(while on-hook)

[confirmation tone]

Note: You may hear a ring-ping tone from your voice terminal as each call is forwarded.

To cancel Send All Calls	1 If you are using an 8411 with a display, press			Menu	and then
	press the softkey below SAC again
	(while on-hook)
	If your 8411 does not have a display or if SAC is not
	available on your display, press	Send Calls	again (while on-
	hook)
	or Dial Send All Calls cancel code __________
	(while on-hook)	[confirmation tone]

37

Image 40

Contents Voice Terminal User’s Guide Contents Page Your 8411 Voice Terminal Top View of the 8411D Voice Terminal With DisplayThese four buttons are labeled Has raised bars for Volume control button Telephone number card Handset Bottom View of the 8411 Voice Terminal Rear View of the 8411 Voice Terminal PassageWay Connection Connection with Analog EquipmentPassageWay Green Light Red Light Status Sharing the 8411 Telephone Line with the Analog Adjunct Which has control Red light Telephone line?Quick Look at the Features Voice FeaturesPage Hold Display Features and Features Used with the Softkeys Normal See ExitHow to Use the Features General InstructionsTroubleshooting Later in This Guide Conventions Used in The Following ProceduresQuick Reference Lists at the Back of This Guide Using the Display, Softkeys and Display Control Buttons Display, Softkeys, and Display Control ButtonsThree Default Feature Option Screens Other Softkey Features That May Be On Your Display Abbreviation FeatureUsing the Softkeys to Activate a Feature Voice Feature Procedures Abbreviated Dialing ADTo program/reprogram To end programming Automatic Callback Bridging/Manual Exclusion Call Coverage/Consult Call Forwarding All Calls Call Park Call Pickup ConferenceHandset Volume DiagnosticsDrop Hold Intercom Automatic/DialWhile off Last Number Dialed Leave Word Calling LWCMessage Mute Priority CallingSelect Ring and Ringer Volume Ringer L H Send All Calls Speaker Speakerphone There are eight possible volume settings. On the display Test/Diagnostics TransferTo send present call to another Press Display Feature Procedures Call InformationDirectory Last name, comma use * , first name or initialExit Normal InspectMessage Retrieval Normal ExitStored Number Timer Time/DateRinging Tones Tones and Their MeaningFeedback Tones Troubleshooting Problem SolutionFeature System 75 Version Changes in Feature Operation System 75 Version NotesAccess code See feature access code Key Words to KnowPage Page Quick Reference Lists Miscellaneous

Related manuals

Manual 31 pages 1.6 Kb