Lucent Technologies 8411 manual There are eight possible volume settings. On the display

Page 43

	• If you have a display, it shows:

		SPEAKER L>>>>>	H

	(There are eight possible volume settings. On the display,
	one arrow is the lowest setting, and eight arrows is the
	highest setting.)
	Note: The Volume control does not affect an external
	speakerphone attached to your voice terminal.

To prevent the other	Note: If the Speakerphone feature is not active, the Mute
party from hearing you	feature turns off the microphone associated with the handset (not
	the speakerphone). However, if the speakerphone is active and
	the handset is not active, then the Mute feature turns off the
	microphone associated with the speakerphone (not the handset).

1 Press Mute

• Red light goes on and other party cannot hear you

2Press

Mute

again to resume talking to party

•Red light goes off and other party can hear you again

To change from	1 Pick up handset and talk
speakerphone to handset	• Red light goes off next to
	• Red light goes off next to

Speaker

To change from handset	1	Press	Speaker
to speakerphone		• Red light goes on next to
		• Red light goes on next to
	2	Hang up handset

Speaker


To end a call	1 Press	Speaker	again to hang up
	• Red light next to				goes off
	• Red light next to			Speaker	goes off

40

Image 43

Contents Voice Terminal User’s Guide Contents Page Top View of the 8411D Voice Terminal With Display Your 8411 Voice TerminalThese four buttons are labeled Has raised bars for Volume control button Telephone number card Handset Bottom View of the 8411 Voice Terminal Rear View of the 8411 Voice Terminal Connection with Analog Equipment PassageWay ConnectionPassageWay Green Light Red Light Status Which has control Red light Telephone line? Sharing the 8411 Telephone Line with the Analog AdjunctVoice Features Quick Look at the FeaturesPage Hold Normal See Exit Display Features and Features Used with the SoftkeysGeneral Instructions How to Use the FeaturesTroubleshooting Later in This Guide Conventions Used in The Following ProceduresQuick Reference Lists at the Back of This Guide Display, Softkeys, and Display Control Buttons Using the Display, Softkeys and Display Control ButtonsThree Default Feature Option Screens Abbreviation Feature Other Softkey Features That May Be On Your DisplayUsing the Softkeys to Activate a Feature Abbreviated Dialing AD Voice Feature ProceduresTo program/reprogram To end programming Automatic Callback Bridging/Manual Exclusion Call Coverage/Consult Call Forwarding All Calls Call Park Conference Call PickupHandset Volume DiagnosticsDrop Intercom Automatic/Dial HoldWhile off Leave Word Calling LWC Last Number DialedMessage Priority Calling MuteSelect Ring and Ringer Volume Ringer L H Send All Calls Speaker Speakerphone There are eight possible volume settings. On the display Transfer Test/DiagnosticsTo send present call to another Press Call Information Display Feature ProceduresLast name, comma use * , first name or initial DirectoryInspect Exit NormalNormal Exit Message RetrievalStored Number Time/Date TimerRinging Tones Tones and Their MeaningFeedback Tones Problem Solution TroubleshootingSystem 75 Version Notes Feature System 75 Version Changes in Feature OperationKey Words to Know Access code See feature access codePage Page Quick Reference Lists Miscellaneous

Related manuals

Manual 31 pages 1.6 Kb