Lucent Technologies 8411 manual Automatic Callback

To place a call using an AD	1 Press	Pers List	or	Grp List	or
list button or code	or Dial appropriate AD List code:

Sys List

•List 1 __________

•	List 2 __________			[dial tone]
•	List 3 __________
Note: An			may also be available;
		Enhcd List
see your system manager.
2 Dial desired list item (1, 2, 3...)
•	Call is automatically dialed			[ringback tone]

Automatic Callback

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, AutCB, appears on the second line of one of the feature option screens.

To automatically place	1 If you are using an 8411 with a display, press			Menu	and then
another call to an extension	press the softkey below AutCB during call attempt
that was busy, did not answer,	If your 8411 does not have a display or if AutCB is not
or returned call waiting
	available on your display, press		during call
		AutoCallBk
ringback tone
	attempt	[confirmation tone]

Note: If you send your calls to coverage after activating Automatic Callback, you callback calls will still ring at your extension and will not be redirected to coverage.

2Hang up

•You will get a 3-burst priority ring when both you and the called extension are idle; when you answer, regular ringing is sent to the called party

3Lift handset when you hear priority ring

Note: Automatic Callback is automatically canceled after 30 minutes.

23