Lucent Technologies 8411 manual Last Number Dialed, Leave Word Calling LWC

Page 35

Last Number Dialed

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, Last, appears on the second line of one of the feature option screens.

To automatically redial the last number you dialed (up to 24 digits) (extension, outside number, or trunk/feature access code)

1If you are using an 8411 with a display, press Menu and then press the softkey below Last

(while on-hook or off-hook)

If your 8411 does not have a display or if Last is not available on your display, press LastDialed (while on-hook or off-hook)

or Dial Last Number Dialed access code __________

(while on-hook or off-hook)

Leave Word Calling (LWC)

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, LWC, (for the Leave Word Calling feature) or CnLWC (for the Cancel Leave Word Calling feature), appears on the second line of one of the feature option screens.


	To leave a message after	1 If you are using an 8411 with a display, press			Menu	and then
	dialing an extension (when	press the softkey below LWC before hanging up your handset
	your call is not answered, you	If your 8411 does not have a display or if LWC is not
	hear a coverage or busy tone,
		available on your display, press	LWC	before hanging up at
	or you have been put on hold)
		your handset		[confirmation tone]

•Message light goes on at called voice terminal (if so equipped)

Note: If reorder tone is heard, message is not stored; try again.

32

Image 35

Contents Voice Terminal User’s Guide Contents Page Top View of the 8411D Voice Terminal With Display Your 8411 Voice TerminalThese four buttons are labeled Has raised bars for Volume control button Telephone number card Handset Bottom View of the 8411 Voice Terminal Rear View of the 8411 Voice Terminal Connection with Analog Equipment PassageWay ConnectionPassageWay Green Light Red Light Status Which has control Red light Telephone line? Sharing the 8411 Telephone Line with the Analog AdjunctVoice Features Quick Look at the FeaturesPage Hold Normal See Exit Display Features and Features Used with the SoftkeysGeneral Instructions How to Use the FeaturesQuick Reference Lists at the Back of This Guide Conventions Used in The Following ProceduresTroubleshooting Later in This Guide Display, Softkeys, and Display Control Buttons Using the Display, Softkeys and Display Control ButtonsThree Default Feature Option Screens Abbreviation Feature Other Softkey Features That May Be On Your DisplayUsing the Softkeys to Activate a Feature Abbreviated Dialing AD Voice Feature ProceduresTo program/reprogram To end programming Automatic Callback Bridging/Manual Exclusion Call Coverage/Consult Call Forwarding All Calls Call Park Conference Call Pickup Drop Diagnostics Handset Volume Intercom Automatic/Dial HoldWhile off Leave Word Calling LWC Last Number DialedMessage Priority Calling MuteSelect Ring and Ringer Volume Ringer L H Send All Calls Speaker Speakerphone There are eight possible volume settings. On the display Transfer Test/DiagnosticsTo send present call to another Press Call Information Display Feature ProceduresLast name, comma use * , first name or initial DirectoryInspect Exit NormalNormal Exit Message RetrievalStored Number Time/Date TimerFeedback Tones Tones and Their MeaningRinging Tones Problem Solution TroubleshootingSystem 75 Version Notes Feature System 75 Version Changes in Feature OperationKey Words to Know Access code See feature access codePage Page Quick Reference Lists Miscellaneous

Related manuals

Manual 31 pages 1.6 Kb