Lucent Technologies 8411 manual Time/Date, Timer

Page 51


To see the number you last	1	Press		Menu	and then press the softkey below View
dialed		or, if View is not available on your display,
		or, if View is not available on your display,
		press
		press		Stored
	2	Press the softkey below Last
		or, if Last is not available on your display,
		press		LastDialed

or Dial Last Number Dialed code __________

Time/Date

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, TmDay, appears on the second line of one of the feature option screens.


To see date and time	1 Press		Menu	and then press the softkey below TmDay
	or, if TmDay is not available on your display,
	press
			Date/Time

•Display returns to Normal Mode after a few seconds

Timer

You can access this feature with the softkeys only if your voice terminal has a display and if the feature name, Timer, appears on the second line of one of the feature option screens.

To see elapsed time (hours,	1 Press	Menu	and then press the softkey below
minutes, seconds)	Timer
	or, if Timer is not available on your display,

press

Timer

•Elapsed time is shown

2To stop timer and clear display, press Menu and then press the softkey below Timer again

or, if Timer is not available on your display, press Timer again

•Elapsed time is displayed on the screen for about four seconds and then disappears

48

Image 51

Contents Voice Terminal User’s Guide Contents Page Top View of the 8411D Voice Terminal With Display Your 8411 Voice TerminalThese four buttons are labeled Has raised bars for Volume control button Telephone number card Handset Bottom View of the 8411 Voice Terminal Rear View of the 8411 Voice Terminal Connection with Analog Equipment PassageWay ConnectionPassageWay Green Light Red Light Status Which has control Red light Telephone line? Sharing the 8411 Telephone Line with the Analog AdjunctVoice Features Quick Look at the FeaturesPage Hold Normal See Exit Display Features and Features Used with the SoftkeysGeneral Instructions How to Use the FeaturesConventions Used in The Following Procedures Troubleshooting Later in This GuideQuick Reference Lists at the Back of This Guide Display, Softkeys, and Display Control Buttons Using the Display, Softkeys and Display Control ButtonsThree Default Feature Option Screens Abbreviation Feature Other Softkey Features That May Be On Your DisplayUsing the Softkeys to Activate a Feature Abbreviated Dialing AD Voice Feature ProceduresTo program/reprogram To end programming Automatic Callback Bridging/Manual Exclusion Call Coverage/Consult Call Forwarding All Calls Call Park Conference Call PickupDiagnostics Handset VolumeDrop Intercom Automatic/Dial HoldWhile off Leave Word Calling LWC Last Number DialedMessage Priority Calling MuteSelect Ring and Ringer Volume Ringer L H Send All Calls Speaker Speakerphone There are eight possible volume settings. On the display Transfer Test/DiagnosticsTo send present call to another Press Call Information Display Feature ProceduresLast name, comma use * , first name or initial DirectoryInspect Exit NormalNormal Exit Message RetrievalStored Number Time/Date TimerTones and Their Meaning Ringing TonesFeedback Tones Problem Solution TroubleshootingSystem 75 Version Notes Feature System 75 Version Changes in Feature OperationKey Words to Know Access code See feature access codePage Page Quick Reference Lists Miscellaneous

Related manuals

Manual 31 pages 1.6 Kb