Lucent Technologies 8411 manual While off

Go to Cvr

while call is

Go to Cvr

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, IAuto (for Automatic Intercom feature), or IDial (for the Dial Intercom feature) appears on the second line of one of the feature option screens.

To make a call to your predetermined Automatic Intercom partner

1If you are using an 8411 with a display, press Menu and then press the softkey below IAuto

(while off-hook)

If your 8411 does not have a display or if IAuto is not

available on your display, press	IcomAuto xxx	(while off-
hook)	[ringback tone]

•Special intercom ring is sent

Note: If call is unanswered, press

ringing if you want to redirect it to coverage.

To dial a call to a member of your Dial Intercom group

1 If you are using an 8411 with a display, press		Menu	and then
press the softkey below IDial
(while off-hook)
If your 8411 does not have a display or if IDial is not
available on your display, press	IcomDial xxx
(while off-hook)		[dial tone]

•Green light goes on steadily

2Dial group member’s 1- or 2-digit code

[ringback tone]

•Special intercom ring is sent

Note: If call is unanswered, press

ringing if you want to redirect it to coverage.

while call is

To answer any	1 Pick up handset
intercom call	• You are connected to call
	Note: If you are active on another call, first

press Hold , then press flashing to the held call, press the xxxxx

xxxxx. To return

of the held call.

31