Lucent Technologies 8411 manual Ringer L H

4When you hear the desired ringing pattern, press Shift again

•You hear confirmation tone (two rising tones), and your new ringing pattern is set

•If your 8411 has a display, it shows the number of the ringing pattern you have selected

•Red light next to

Shift

goes off

Note: If you receive a call, go off-hook, or lose power during selection, the process is interrupted and you must start again.

To adjust ringer volume	1 To raise the volume, press the right half of the
if necessary (speaker is not	Volume control button labeled	;
active)	to lower the volume, press the left half of the
	Volume control button labeled

•If you have a display, it shows:

RINGER L>>>>> H

(There are eight possible volume settings. On the display, one arrow is the lowest setting, and eight arrows is the highest setting.)

One full ring cycle will sound to demonstrate the new volume.

36