Lucent Technologies 8411 manual Hold, Intercom Automatic/Dial

To raise or lower the receive 1 While handset is off-hook, press the Volume control button
level volume	• To raise the volume, press the right half of the Volume
of the handset
	control button labeled	;

to lower the volume, press the left half of the Volume control button labeled

•If your 8411 voice terminal has a display, it shows:

HANDSET L>>>>> H

(There are eight possible volume settings. On the display, one arrow is the lowest setting, and eight arrows is the highest setting.)

Hold

✔

To put a call on hold while	1 Press	Hold
you answer another call, make	• Green light next to held call flutters
a call, or perform some other
task	Note: If you put a conference call on hold, the other parties
	remain connected.

To answer a new call while active on another

1Press Hold

•Green light next to held call flutters

2Press xxxxx of incoming call

•You are connected to incoming call

To return to held call	1 Press		xxxxx		of held call
	• You are connected to held call
	Note: If you are active on a call and you press
	the	xxxxx		of the held call, the active call will be dropped.

Intercom (Automatic/Dial)

30